Ricoh 220, 270 operating instructions Loading Paper, Loading non-standard size paper in the tray

BLoading Paper

BLoading Paper

Note

❒If you want to change the paper size, see ⇒ P.103 “Changing the Pa- per Size”.

Reference

Regarding paper types and sizes that can be set, see ⇒ P.19 “Copy

Paper”.

APull out the paper tray until it stops.

BSquare the paper and set it in the tray.

Loading non-standard size paper in the tray 2

AWhen you set the non-standard size paper in tray 2, do not stack the paper above the low- er limit mark of tray 2.

3

CReinstall the back fence.

DPush the paper tray in until it stops.

Important

❒Do not stack paper over the lim- it mark.

❒If paper is left in the paper tray and then you add paper, a mis- feed might occur.

Note

❒Shuffle the paper before setting it in the tray.

89