Ricoh 270, 220 operating instructions Manual Paper Select, Auto Paper Select, Select the copy paper

Copying

❖Manual Paper Select

You can select the desired copy pa- per size manually. You can also se- lect the bypass tray.

Reference

❒ When you set special paper in the

paper tray, you can have the kind

of paper shown on the display. See

“14. Special Pap. Indict” of the Sys-

tem Settings.

❒ If a paper tray has been specified

2

See ⇒ P.41 “Copying from the By- pass Tray”.

as containing special paper, Auto

Paper Select cannot use it. See “14.

Note

❒When you use Auto Paper Select, refer to the following table for pos- sible copy paper sizes and direc- tions (if the ratio is 100%).

❖ Metric version

Where
original is
set	Paper size and direction
Exposure	A3 L, B4JIS L, A4 KL,
glass	B5JIS KL, 81/2" × 13" L,
	81/ " × 14" L
	2
Document	A3 L, B4JIS L, A4 KL,
feeder	B5JIS KL, A5 KL, 81/2"
	× 13"L

❖ Inch version

Where
original is
set	Paper size and direction
Exposure	11" × 17" L, 81/2" × 14" L,
glass	81/ " × 11" KL, 81/ "		×
	2	2
	13" L, 10" × 14" L, 8" × 10"
	K
Document	11" × 17" L, 81/2" × 14" L,
feeder	81/ " × 11" KL, 51/ "		×
	2	2
	81/ " KL
	2

Special Pap. Indict”.

❒ If you specify all papers trays as

containing special paper you can-

not use Auto Paper Select.

❒ If you set the all paper tray to spe-

cial paper, you cannot use the

Auto Paper Select function.

ASelect the copy paper.

Auto Paper Select

A Make sure that Auto (Auto Pa- per Select) is selected.

Manual Paper Select

A Select the paper tray or bypass tray by pressing the 01 keys.

❒For some originals, the original

size might not be detected correct- ly. See ⇒ P.17 “Sizes Difficult to De- tect”.

32