Ricoh 270 When copying onto OHP transparencies, When copying onto non-standard size copy paper

Copying

1:Horizontal size

2:Vertical size

3:Extender

4:Paper guide

Important

❒If the guides are not flush with

2	the copy paper, a skew image or
	paper misfeeds might occur.

Note

❒Do not stack paper over the lim- it mark; otherwise a skew image or paper misfeeds might occur.

❒Set the direction of the copy pa- per to L.

❒Swing out the extender to sup-

port larger size copy paper

(larger than A4L, 81/2" × 11"L).

❒Fan paper to get air between the sheets and avoid a multi-sheet feed.

When copying onto OHP transparencies

ALightly insert the OHP trans- parencies face up and adjust the paper guide.

Important

❒The side of OHP transparen- cies that is copied is fixed. Be- fore you set the OHP transparencies in the bypass tray, check the cutting posi- tion of the OHP transparen- cies.

DPush down the paper guide re- lease lever.

is selected automatically.

Note

❒If you set A4, 81/2" × 11" or larg- er copy paper, hold the edge of the paper and push down the paper guide release lever.

❒If you do not push down the pa- per guide release lever, a mis- feed might occur.

When copying onto non-standard size copy paper

Important

❒You should specify the size of copy paper to avoid paper mis- feeds.

42