Ricoh 270, 220 operating instructions Turning off the Power, Press the Energy Saver key

Basics

Note

❒If the power is not turned on when the operation switch is

1	pressed, check if the main pow-
	er switch is on. If off, turn it on.

❒During the warm-up period,

you can use the Auto Start func- tion. See ⇒ P.48 “Auto Start— Entering Copy Job Settings Dur- ing the Warm-up Period”.

❒Warm-up period is 45 seconds.

When the machine is set for user codes

AEnter your user code using the Number keys. Then press the {#} key.

Note

❒To prevent others from making

copies with your user code, press the {Clear Modes} key and the {Clear/Stop} key simulta- neously after copying.

Reference

For how to set user codes, see ⇒

P.119 “1. General Features 4/4”.

When the {Energy Saver}indicator is lit

The machine is in Energy Saver mode.

APress the {Energy Saver} key.

The machine will return to the ready condition.

Note

❒The machine will also return to the ready condition when an original is set in the document feeder, or when the platen cover or document feeder is opened.

Reference

See “06. Panel Off Timer” in the System Settings Reference.

Turning off the Power

Important

❒If you wish to unplug the power cord or turn off the main power switch, make sure that the remain- ing memory space indicates 100% on the display for fax mode.

❒Fax files stored in memory will be lost an hour after you turn the main power switch off or you un- plug the power cord. See “Turning off the Power” in the Fax Refer- ence.

APress the operation switch to make the On indicator go off.

14