Ricoh 220, 270 operating instructions Original with the Number keys, Then press the # or 1 key

Directional Size Magnification (inch)—Stretching and Squeezing the Image into the Copy Area

Directional Size Magnification (inch)— Stretching and Squeezing the Image into the Copy Area

The suitable reproduction ratios will be automatically selected when you enter the horizontal and vertical lengths of the original and copy im- age you want.

Preparation

Specify the vertical and horizontal sizes of the original and those of the copy, as shown in the illustra- tion.

❒When you set the originals in the

document feeder, you can change
	2
the reproduction ratio from 50–200
%.

❒If the calculated ratio is over the maximum or under the minimum ratio, it is corrected within the range of the ratio automatically. However, with some ratios, parts of the image might not be copied or blank margins will appear on copies.

APress the {D. Size Mag. (inch)} key.

1

2

3

4

B Enter the horizontal size of the

original with the Number keys.

Then press the {#} or 1 key.

CP2M01EE

1:Horizontal original size

2:Vertical original size

3:Horizontal copy size

4:Vertical copy size

Note

❒You can enter sizes within the fol- lowing ranges:

Metric version	1 – 999mm (in
	1mm steps)
Inch version	0.1" – 99.9" (in 0.1"
	steps)

❒You can change the reproduction ratio from 25–400 %.

Note

❒ To change the value entered,

press the {Clear/Stop} key and

enter the new value.

CEnter the horizontal size of the

copy with the Number keys. Then, press the {#} or 1 key.

DEnter the vertical size of the origi- nal with the Number keys. Then press the {#}or 1 key.

53