Ricoh 270, 220 operating instructions Duplex, Adjust Image 1/3

What to do If Something Goes Wrong

3

88

Duplex

Problem	Cause	Action
Order of copies is not	You set originals in the incor-	When setting a stack of origi-
correct.	rect order.	nals in the document feeder,
		the last page should be on the
		bottom.
		If you set an original on the
		exposure glass, start with the
		first page to be copied.
In Margin Adjust-	The margin is too wide.	Set a narrower margin with
ment mode, parts of		the user tools. See “03. Left
the original image are		Dup. Margin” in ⇒ P.121 “2.
not copied.		Adjust Image 1/3”. See “04. Top
		Dup. Margin” in ⇒ P.121 “2.
		Adjust Image 1/3”.
Orientation of copies	You set originals in an incor-	Select the correct orientation,
(Top to Top, or Top to	rect direction or the orienta-	or set originals correctly. ⇒
Bottom) is not correct.	tion setting is incorrect.	P.64 “Duplex—Making Two-
		Sided Copies”

Note

❒ If you set A3, 11" × 17" or B4JIS, 81/2" × 14" originals as shown below, for exam- ple, take one of the two ac- tions described below the illustration.

❒ Select [Top to Bottom] to make copies in “Top to Top” orientation. Select [Top to Top] to make copies in “Top to Bottom” orien- tation.

❒ Alternate the originals as shown below when setting them.