Ricoh 220, 270 Setting Originals on the Exposure Glass, Setting Originals Document Feeder

Setting Originals

Setting Originals

Note

❒Basically the originals should be aligned to the rear left corner. However, some copy functions may produce different results de- pending on the direction of the originals. For details, see explana- tions of each function.

Originals	Set in the	Set on the
	document	exposure
	feeder	glass

Reference

See ⇒ P.16 “Originals”.

Setting Originals on the Exposure Glass

ALift the platen cover or the docu- ment feeder.

Note

❒Be sure to open the platen cover

or the document feeder by more than 30°, otherwise the original size might not be detected cor- rectly.

BSet the original face down on the exposure glass. The original should be aligned to the rear left corner.

2

1:Reference mark

2:Scale

CLower the platen cover or the doc- ument feeder.

Setting Originals in the

Document Feeder

Note

❒The original might become dirty if it is written with a pencil or similar tools.

❒You cannot set a multi-page origi- nal with pages of different sizes in the document feeder. If your origi- nal contains pages of different siz- es, use the SADF function and set each page one at a time. Alterna- tively, set pages one at a time on the exposure glass.

❒Do not place any foreign objects on the document feeder or cover it with your hand. This could cause the size not to be detected proper- ly.

27