Ricoh 220, 270 Other Functions, Energy Saver Mode-Saving Energy, While a document is being fed

Other Functions

Other Functions

Energy Saver Mode—Saving Energy

If you do not operate the machine for a certain period after copying, or when you press and hold the {Energy Saver} key for more than one second, the display goes blank and the ma- chine enters Energy Saver mode. When you press the {Energy Saver} key again, when the originals are set in the document feeder, or when the platen cover or document feeder is opened, the machine returns to the ready condition. In Energy Saver mode, the machine uses less electrici- ty.

Energy Saver mode makes a two-step reduction in electricity: one for the pe- riod up to the time set for Low Power mode, the other for the period after that time.

Note

❒The period for which the machine remains in Energy Saver mode (i.e. the period until the mode is turned off to return to the ready condi- tion) varies with the effectiveness of energy saving.

Reference

Interrupt—Temporarily

Stopping One Job to Copy

Something Else

2

You can make urgently needed copies during a multi-copy run.

Note

❒The procedure for making inter- rupt copies depends on which kind of operation the machine is currently carrying out.

While a document is being fed

APress the {Interrupt} key. The key indicator lights.

BRemove the originals currently set for copying, and set your orig- inals for interrupt copying.

Reference

For functions that cannot be used together with this func- tion, see ⇒ P.80 “Combination

Chart”.

CPress the Start key.

The machine starts making your copies.

See “06. Panel Off Timer”, “07. En- ergy Saver Level”, “08. Energy Saver Timer” of the System Set- tings Reference.

DAfter interrupt copying, remove the originals for interrupt copy- ing and the copies.

EPress the {Interrupt} key again. The key indicator goes off.

FReset the previous originals. Then press the {Start} key.

47