Ricoh 220, 270 operating instructions Combine, Stamp

If You Cannot Make Copies as You Want

Combine

Problem	Cause	Action
Parts of the image are	You specified an improper re-	When you specify a reproduc-
not copied.	production ratio that does not	tion ratio using Manual Paper
	meet the sizes of your origi-	Select mode, make sure the ra-
	nals and copy paper.	tio matches your originals and
		the copy paper.

		Note
		❒ Select the correct repro-
		duction ratio before using
		Combine mode.
	Your originals are not identi-	Use originals that are identical
	cal in size and direction.	in size and direction.
Order of copies is not	You set originals in the incor-	When setting a stack of origi-
correct.	rect order.	nal in the document feeder,
		the last page should be on the
		bottom.
		If you set an original on the
		exposure glass, start with the
		first page to be copied.

Stamp

3

Problem	Cause	Action
Stamps do not appear	The original is not set correct-	Set original correctly.
on copies.	ly.	See ⇒ P.75 “Preset Stamp—
		Printing Preset Messages on
		Your Copies”.
Original image and	The stamp is set to solid.	Change to screen. See ⇒ P.127
stamp overlap on cop-		“4 Stamp Setting 3/3”.
ies and original image
	Your original has narrow	Change the stamp position.
cannot be read.	margins on four sides.	See ⇒ P.127 “4 Stamp Setting
		3/3”.
Page numbers do not	The numbering position is	Change the numbering posi-
appear in the position	wrong.	tion.
you require.		See ⇒ P.126 “4 Stamp Setting
		2/3”.

87