Ricoh 220, 270 operating instructions Shift Stack optional finisher or shift sort tray required

After all the originals are scanned, the copies are deliv- ered to the tray.

Note

❒If an original is misfed, reset your originals in the docu- ment feeder according to the instruction on the display. The display will indicate the number of originals you should return.

When setting an original on the exposure glass or in the document feeder

Reference

See ⇒ P.28 “When SADF mode is selected”

ASet the original, then press the {Start} key.

BSet the next original, then press the {Start} key.

Note

❒Set the original in the same direction as the first one.

CAfter all originals are scanned, press the {#} key.

The copies are delivered to the tray.

Sort/Stack/Staple

Stack—Delivering Copies in Page Batches (111, 222, 333)

The optional finisher or shift sort tray is required to use this function.

Copies can be assembled with each	2
page set.

❖Shift Stack (optional finisher or shift sort tray required)

Every other page set is shifted for ease of separation. The shift tray of the finisher or shift sort tray pro- vides this function by sliding from side to side.

	2	3	1
1			2

Reference

For the maximum tray capacity of the optional finisher, see ⇒ P.38 “Staple”.

APress the [Sort/Staple] key.

B Select the [Stack ] by pressing the 1 key. Then, press the [OK] key.

CEnter the number of copies with the Number keys.

DSet your originals.

37