Manuals / Ricoh / Computer Equipment / All in One Printer

Ricoh 270, 220 operating instructions Power consumption, Weight, 136

Models: 270 220

1 160

Download 160 pages 25.23 Kb

Page 148

Specification

❖Power consumption:

• Mainframe only

	Type 1	Type 2

Warm up	About 1.0kW	About 1.0kW

Stand-by	About 120Wh	About 120Wh

Copying	About 500Wh	About 500Wh

Maximum	Less than 1.44kW	Less than 1.44kW

• Full system

				Type 1 *1		Type 2
			Warm up	About 1.0kW		About 1.0kW

			Stand-by	About 130Wh		About 130Wh

			Copying	About 500Wh		About 500Wh

			Maximum	Less than 1.44kW		Less than 1.44kW

			*1 Mainframe with the document feeder, bridge unit, paper tray unit, large capac-
			ity tray, finisher, duplex unit, 1 bin tray and 48MB copier memory unit.
	6
	6		❖ Dimensions (W × D × H up to exposure glass):
			❖ Dimensions (W × D × H up to exposure glass):
			• 550 × 580 × 709mm, 21.7" × 22.9" × 28.0"
			❖ Noise Emission (ISO7779 Sound Power Level)
			Based on actual measurement

					Mainframe only		Complete System

			Copying		64dB (A)		67.5dB (A)

			Stand-by		40dB (A)		40dB (A)

❖ Weight:

• Type 1, 2: Approx. 55kg, 121.3 lb

Note

❒Specifications are subject to change without notice.

136

Image 148

Ricoh 270, 220 operating instructions Power consumption, Weight, 136

Contents

220/270 Overseas Affiliates Page FCC Requirements This equipment uses the following Usoc jack RJ11CSafety Information Safety During OperationPage Iii How to Read this Manual SymbolsTable of Contents Numbering-Printing Page Numbers Combination Chart Sort/Stack/StapleOther Functions Combine-Combining Originals into One CopyAccessing the User Tools Copy Features 111 If Your Machine does not Operate as You WantLoading Paper Adding Staples 107 Removing Jammed Staples 109Dos and Donts 129 Where to Put Your Machine 130 Maintaining Your Machine 132146 ViiiThis page is intentionally blank What You Can do with this Machine Copy Mode Page Machine Types Guide to Components Main Power indicator On indicatorOperation switch Bypass tray optionOptions Indicators Copier only Fax or printer installedOperation Panel Keys Cursor keys Panel displayStamp key Zoom key Lighter key and Darker keys and Auto Image Density keyNumber keys Start keyDisplays and Key Operations Panel DisplayCopy display Common keys −Prev. ↓NextTurning on the Power Power switches for fax or printer installed machineOperation switch right side of the op- eration panel Main power switch front of the ma- chinePress the operation switch to make the On indicator go off Turning off the PowerPress the Energy Saver key Changing Modes Sizes and Weights of Recommended Originals OriginalsMetric version Inch versionSizes Difficult to Detect Sizes detectable by the Auto Paper Select Metric versionExposure glass Original Sizes and Scanning Area/Missing Image AreaDocument feeder Copy Paper Recommended Paper Sizes and TypesChanging the Paper Size Paper Size in Tray Non-recommended Paper Paper StorageToner Toner StoragePhoto Conductor Unit PCU Handling Photo Conductor UnitPhoto Conductor Unit Storage Replacing Photo Conductor UnitBasic Procedure Make sure that the machine is in Copy modeMake sure that there are no previ- ous settings remaining Set your originalsSystem Reset Auto OffSetting Originals Setting Originals on the Exposure GlassSetting Originals Document Feeder Lift the platen cover or the docu- ment feederSetting a stack of originals in the document feeder When Sadf mode is selectedOriginals in the Document Feeder Adjusting Copy Image Density Basic FunctionsSelecting Copy Paper TextText·Photo PhotoManual Paper Select Auto Paper SelectManual Paper Select Select the copy paperReproduction Ratios Machine ChooseRotate Copy Where Original is Original size and direc Set Tion Sort/Stack/Staple Sort-Sorting into Sets 123, 123Sort StackWhen setting a stack of originals in the document feeder Rotate Sort Shift SortRotate Sort Shift Sort optional finisher or shift sort tray requiredShift Stack optional finisher or shift sort tray required After all originals are scanned, press the # keyStaple Set the original, then press the Start keyStaple position and original direction When memory reaches 0% Copying from the Bypass Tray Open the bypass tray Push up the paper guide release leverWhen copying onto non-standard size copy paper When copying onto OHP transparenciesPush down the paper guide re- lease lever Press the Pap.Type key when When copying onto non-detected standard size paperPress the Exit key Set your originals, then press the Start key Program-Storing Your Copy Settings in Memory Storing Your SettingsStoring a Program Deleting a ProgramDeleting a Program Recalling a ProgramEnergy Saver Mode-Saving Energy Other FunctionsWhile a document is being fed User Codes Interrupting copying after allOriginals have been fed Press the Interrupt keyHow to Set the Papers with Letterhead When you want to make two sided copiesWhen you want to make one sided copies Original ToneOriginal → Copy Press the Reduce/Enlarge key to select a ratio Select the ratio by pressing the 01 keysWhen using the Number keys When using the n or o keyZoom-Reducing and Enlarging in 1% Steps Original with the Number keys Then press the # or 1 keySize Mag. inch key, then Set your originals, then pressSet your originals, then press the Start key Center/Border Erase-Erasing the Center and the Border Center EraseBorder Erase CenterCenter BorderCombine-Combining Originals into One Copy OrigOrig. optional duplex unit is required Front⇒ P.122 2. Adjust Image 2/3 Orig. optional duplex unit is re- quiredPortrait K originals Set your originals, then press the Startkey Book Sided The optional document feeder is requiredSided -Making One- sided Copies from Two-sided Originals Sided -Making Two- sided Copies from One-sided Originals Duplex-Making Two-Sided CopiesSided Originals and copy direction Original direction and completed copiesSided -Making Two- sided Copies from Two-sided Originals When setting the copy directionPress the Orientn. key Original Copy paper Cover-Adding or Inserting Sheets Front Cover-Copying or Adding a Front CoverFront Cover Both CoversBoth Covers-Copying or Adding Front and Back Covers OHP Slip Sheet-Copying or Inserting Slip Sheets Positive/Negative-Copying Complementary Colors Repeat Image-Repeating an Image over the Entire Copy Original 51/2 × 81/2K/Copy11L 11KMerging Images Overlay-Merging Two Different Originals Set your originals, then press the Start key Preset Stamp-Printing Preset Messages on Your Copies Original setting, stamp position OrientationWhen changing the stamp Position and orientationWhen changing the numbering format Numbering-Printing Page Numbers Original setting, stamp position and orientationPress the Stamp key Press the Page No. key To change the numbering position If you selected numbering format 1/5, 2/5, … in step CPress the OK key Press the Exit key Combination Chart Following shows the combinations of functionsCombination Chart Copying If Your Machine does not Operate as You Want MessageProblem Cause Action DisplayAdjusting Copy Image Density If You Cannot Make Clear CopiesAdjust Image If You Cannot Make Copies as You WantCombine StampAdjust Image 1/3 DuplexLoading Paper Loading non-standard size paper in the trayPull out the large capacity tray Loading Paper in the Large Capacity TrayPush the tray in until it stops Place the paper in the tray Changing the Toner Bottle Regarding toner storage, see ⇒ P.23 Toner StorageWhat to do If Something Goes Wrong Replacing Photo Conductor Unit PCU PCUWhat to do If Something Goes Wrong Replacing Photo Conductor Unit PCU What to do If Something Goes Wrong Close the right cover of the machine Clearing Misfeeds Clearing Misfeeds 100 101 102 Changing the Paper Size 103Lock the side lever 104Setting the non-standard size paper Changing the Paper Size in TrayStandard Paper Non-standard PaperWhen the paper size you require is displayed When the paper size you require is not displayed106 Press the 0 or 1 key to select the paper size. Then pressAdding Staples 107108 Removing Jammed Staples 109110 111 Accessing the User Tools Copy FeaturesEnter 2 with the Number keys Exiting the User Tools 112113 User Tools Menu Copier Features 114115 General Features 1/4 Settings You Can Change with the User Tools116 General Features 2/4 117General Features 3/4 118General Features 4/4 119120 Adjust Image 1/3 121Adjust Image 2/3 122123 Input/Output 1/2 124Input/Output 125126 Stamp Setting 127128 Dos and Donts 129Where to Put Your Machine Machine EnvironmentOptimum environmental conditions Environments to avoidAccess to Machine Power Connection131 Cleaning the Platen Cover Cleaning the Document Feeder Cleaning the Exposure GlassCleaning the machine Maintaining Your MachineMainframe Copy paper weight Non-reproduction areaFirst copy time Copying speed TypeReproduction ratio Continuous copying countCopy paper capacity 135Weight Power consumption136 Document Feeder Option Paper Tray Unit Option Available paper sizePaper capacity 138Number of bins Available paper size Internal Tray 2 1bin tray Option139 Finisher Option 141 Shift Sort Tray OptionApprox .6kg, 3.5 lb Large Capacity Tray LCT Option 142Duplex Unit Option Power consumption Max143 Bypass Tray Option 14448MB Copier Memory Unit Option Memory capacityAdditional functions Number of originals that can be stored about 100 pagesIndex 146147 148