Ricoh 270, 220 operating instructions When memory reaches 0%

Copying

To stop scanning

When you are using the Sort, Stack, or Staple function, the originals are scanned into memory.

APress the {Clear/Stop} key.

2

To resume scanning

APress the {Start} key. Scanning is resumed.

Note

❒Scanned images in memory are not cleared.

To copy scanned so far originals

APress the [Print] key.

The scanned pages are delivered to the tray then the image data in memory is cleared.

BRemove the copies and continue copying by following the instruc- tions on the display.

To cancel the copy operation

APress the [Clear] key.

Scanning is stopped and the set- tings are cleared.

To clear all scanned images

APress the {Clear Modes} key.

Scanning is stopped and the set- tings are cleared.

When memory reaches 0%

Scanning will be stopped if the size of scanned image data exceeds memory capacity.

Note

❒The number of originals that can be stored in memory varies de- pending on the memory setting and original type.

❒The maximum number of originals that can be stored is about 100 pag- es.

Reference

For details, see “08. Print Quality” and “09. Image Adjustment” in ⇒ P.117 “1. General Features 2/4”

40