Ricoh 270, 220 operating instructions If You Cannot Make Copies as You Want, Adjust Image

3

What to do If Something Goes Wrong

If You Cannot Make Copies as You Want

Problem	Cause	Action
Copies are not sta-	There are jammed staples in	Remove jammed staples. See
pled.	the stapler.	⇒ P.109 “e Removing Jammed
		Staples”.

		Note
		❒ After removing jammed
		staples or adding staples,
		staples might not be eject-
		ed the first few times you
		try to use the stapler.
	The number of copies exceeds	Check the stapler capacity.
	the capacity of the stapler.	See ⇒ P.38 “Staple”.
	The stapler has run out of sta-	Add staples. See ⇒ P.107 “d
	ple.	Adding Staples”.
Staples are wrongly	Originals are not set correctly.	Set originals correctly. See ⇒
positioned.		P.38 “Staple”.
Misfeeds occur fre-	Copy paper size setting is not	Set the proper paper size. See
quently.	correct.	⇒ P.103 “Changing the Paper
		Size”.
You cannot combine	Selected functions cannot be	Refer to the combination
several functions.	used together.	chart. See ⇒ P.80 “Combina-
		tion Chart”.

Adjust Image

Problem	Cause	Action
In Center/Border	The margin is too wide.	Set a narrower margin with
mode, parts of the		the user tools. See “01. Border
	Your original has narrow
original image are not		Erase Width” in ⇒ P.121 “2.
copied.	margins on four sides.	Adjust Image 1/3”. See “02.
		Center Erase Width” in ⇒
		P.121 “2. Adjust Image 1/3”.
In Image Repeat	You selected the same size	Select copy paper larger than
mode, the original im-	copy paper as originals, and	the originals. See ⇒ P.72 “Re-
age is not copied re-	did not select the proper re-	peat Image—Repeating an Image
peatedly.	production ratio.	over the Entire Copy”.
		Select the proper reproduc-
		tion ratio. See ⇒ P.72 “Repeat
		Image—Repeating an Image over
		the Entire Copy”.

86