EnGenius Technologies ENH500 PPPoE Point-to-Point Protocol over Ethernet, That it remains in Auto

Page 56

9.1.3 PPPoE (Point-to-Point Protocol over Ethernet)

Select PPPoE as your WAN connection type if your ISP provides a Username and Password. If the PPPoE is a DSL service, please remove the PPPoE software from your computer as the software is not necessary with the use of the ENH500.

	Internet Connection	Select PPPoE to begin configuration of the PPPoE connection.
	Type
	Type
	MTU	Specify the Maximum Transmit Unit size. EnGenius recommends
		that it remains in Auto.

	Login	Specify the Username that is given by your ISP.
	Password	Specify the Password that is given by your ISP.
	Service Name	Specify the Service Name that is given by your ISP.

Image 56

Contents Wireless Access Point / Client Bridge Table of Contents LAN Setup Appendix B Specifications Appendix C Glossary About This Document Before you startFeatures Difficult-to-wire environmentsAbility to access real-time information Product OverviewWireless extensions of Ethernet networks Wired LAN backupFrequently altered environments Training and educational facilitiesBenefits Hardware Overview Package ContentsSystem Requirement Understanding the ENH500 LEDs LEDInstalling the ENH500 InstallationPre-installation Guidelines Wireless Network Modes Access Point Mode This completes the installation procedureAccess Point with WDS Function Mode Client Bridge Mode WDS Bridge Mode Client Router Mode Page Configuring Your Computer for TCP/IP Configuring Microsoft WindowsPage Configuring Microsoft Windows Vista Configuring Microsoft Windows XP Configuring Apple Mac OS Click the Network Connections iconLogging into the ENH500 Username and Password Status Save / LoadMain Wireless Client List System LogConnection Status Dhcp Client TableSystem Switching the Operation Mode Wireless Configuration Wireless SettingsWireless Mode Channel HT ModeAccept / Cancel Extension ChannelWireless Security Save / CancelSuppressed Ssid Station SeparationWDS Client Site SurveyPrefer Bssid Profile RefreshWireless mode supports 802.11a/n mixed modes. It is MAC Address ModeFilled in if an AP in the Site Survey is selected Profile Wireless Security Settings 1 WEPWPA-PSK 3 WPA2-PSK WPA-PSK Mixed 5 WPA 6 WPA2 WPA Mixed Wireless Advanced Settings Shaping Wireless TrafficAggregation Wireless MAC Filter ACL ModeMAC Address Filter AddWDS Link Settings LAN Setup IP SettingsSpanning Tree Settings Static IP Router SettingsWAN Settings Internet Connection Type Account Name Domain NameDhcp Dynamic IP Internet Connection TypeGet Automatically From Use These DNS ServersSecondary DNS servers manually That it remains in Auto PPPoE Point-to-Point Protocol over EthernetSpecify the Maximum Transmit Unit size. EnGenius recommends Connect on Demand Keep AliveGet Automatically From ISPPptp Point-to-Point Tunneling Protocol Pptp Server UsernameLAN Settings Router Mode VPN Pass Through Port Forwarding DMZ Address DMZDMZ Hosting Management Settings AdministrationPort Save / Apply / CancelManagement Vlan Snmp Settings Backup/Restore Settings Firmware UpgradeTime Settings Save/Apply / Cancel 10.7 LogSyslog Log Server IP AddressDiagnostics Network Configuration Examples Access PointSelect Operation Mode to Client Bridge from System PropertiesWDS Bridge Select Operation Mode to Client Router from System Change your Local Area Network setting to Obtain an IPInternet Service Provider on the WAN Settings Address AutomaticallyQuestion Answer Appendix a TroubleshootingTo Factory Default in the Management Contacting Technical Support Rx Sensitivity Optimal dBm Appendix B SpecificationsChannel Tx Avg. Power Optimal dBm Environment & Mechanical Access Point Appendix C GlossaryESS ID Passphrase Simple Network Management Protocol Snmp WPA2 Appendix D Statements of Conformity Federal Communication Commission Interference StatementIndustry Canada Statement Europe Declaration of Conformity 0560 Slovensky Slovak Suomi Finnish