EnGenius Technologies ENH500 user manual LAN Setup, IP Settings

Page 50

8 LAN Setup

This section will guide you to setup the Local Area Network (LAN) settings

8.1 IP Settings

This section is only available for Non-Router Mode. IP Settings allows you to configure the IP settings of the ENH500.

IP Network Setting

Select Radio button for Obtain an IP address automatically or

 

Specify an IP address.

 

 

IP Address

Specify LAN port IP address.

IP Suet Mask

Specify Subnet Mask.

Default Gateway

Specify Default Gateway.

Primary DNS

Specify Primary DNS.

 

 

Secondary DNS

Specify Secondary DNS.

 

 

Accept / Cancel

Press Accept to confirm the changes or Cancel to return

 

previous settings.

 

 

Please make note of the following:

1.Obtain an IP address automatically is not a DHCP server. This setting allows the ENH500 to automatically request an IP address when it is connected to a device which has a DHCP server.

2.Changing LAN IP Address will change LAN Interface IP address. The webpage will automatically redirect to the new IP address after Apply is selected.

Image 50
Contents Wireless Access Point / Client Bridge Table of Contents LAN Setup Appendix B Specifications Appendix C Glossary About This Document Before you startAbility to access real-time information FeaturesDifficult-to-wire environments Product OverviewFrequently altered environments Wireless extensions of Ethernet networksWired LAN backup Training and educational facilitiesBenefits Hardware Overview Package ContentsSystem Requirement Understanding the ENH500 LEDs LEDInstalling the ENH500 InstallationPre-installation Guidelines Wireless Network Modes Access Point Mode This completes the installation procedureAccess Point with WDS Function Mode Client Bridge Mode WDS Bridge Mode Client Router Mode Page Configuring Your Computer for TCP/IP Configuring Microsoft WindowsPage Configuring Microsoft Windows Vista Configuring Microsoft Windows XP Configuring Apple Mac OS Click the Network Connections iconLogging into the ENH500 Username and Password Status Save / LoadMain Wireless Client List System LogConnection Status Dhcp Client TableSystem Switching the Operation Mode Wireless Configuration Wireless SettingsAccept / Cancel Wireless ModeChannel HT Mode Extension ChannelSuppressed Ssid Wireless SecuritySave / Cancel Station SeparationWDS Client Site SurveyPrefer Bssid Profile RefreshWireless mode supports 802.11a/n mixed modes. It is MAC Address ModeFilled in if an AP in the Site Survey is selected Profile Wireless Security Settings 1 WEPWPA-PSK 3 WPA2-PSK WPA-PSK Mixed 5 WPA 6 WPA2 WPA Mixed Wireless Advanced Settings Shaping Wireless Traffic Aggregation MAC Address Filter Wireless MAC FilterACL Mode AddWDS Link Settings LAN Setup IP SettingsSpanning Tree Settings Static IP Router SettingsWAN Settings Account Name Internet ConnectionType Domain NameGet Automatically From Dhcp Dynamic IPInternet Connection Type Use These DNS ServersSecondary DNS servers manually That it remains in Auto PPPoE Point-to-Point Protocol over EthernetSpecify the Maximum Transmit Unit size. EnGenius recommends Get Automatically Connect on DemandKeep Alive From ISPPptp Point-to-Point Tunneling Protocol Pptp Server UsernameLAN Settings Router Mode VPN Pass Through Port Forwarding DMZ Address DMZDMZ Hosting Management Settings AdministrationPort Save / Apply / CancelManagement Vlan Snmp Settings Backup/Restore Settings Firmware UpgradeTime Settings Syslog Save/Apply / Cancel10.7 Log Log Server IP AddressDiagnostics Network Configuration Examples Access PointSelect Operation Mode to Client Bridge from System PropertiesWDS Bridge Internet Service Provider on the WAN Settings Select Operation Mode to Client Router from SystemChange your Local Area Network setting to Obtain an IP Address AutomaticallyQuestion Answer Appendix a TroubleshootingTo Factory Default in the Management Contacting Technical Support Rx Sensitivity Optimal dBm Appendix B SpecificationsChannel Tx Avg. Power Optimal dBm Environment & Mechanical Access Point Appendix C GlossaryESS ID Passphrase Simple Network Management Protocol Snmp WPA2 Appendix D Statements of Conformity Federal Communication Commission Interference StatementIndustry Canada Statement Europe Declaration of Conformity 0560 Slovensky Slovak Suomi Finnish