EnGenius Technologies ENH500 Appendix B Specifications, Channel Tx Avg. Power Optimal dBm

Page 77

Appendix B – Specifications

MCU:

Atheros AR7240

RF:

Atheros AR9280

Memory:

32 MB

Flash:

8 MB

Standard:

802.11 a/n

Physical Interface:

- 1x LAN Port with PoE support

 

- 1x LAN Port

 

- 1x Reset button

Max. Data rate:

300 Mbps

LEDs status:

- Power Status

 

- LAN1/LAN2 (10/100Mbps)

 

- WLAN (Wireless is up)

 

- 3 x Link Quality (Client Bridge mode)

Security:

- WEP Encryption-64/128/152 bit

 

- WPA/WPA2 Personal (WPA-PSK using TKIP or AES)

 

- WPA/WPA2 Enterprise (WPA-EAP using TKIP)

 

- 802.1x Authenticator

 

- Hide SSID in beacons

 

- MAC address filtering, up to 50 field

 

- Wireless STA (Client) connected list

Power Requirements:

- Active Ethernet (Power over Ethernet)

 

- Proprietary PoE design

 

- Power Adapter 24VAC / 1.0A

Antenna:

- Internal Directional 13dBi with dual polarization

Package Contents:

- Wireless Long Range 11N AP/CB (ENH500)

 

- PoE Injector (EPE-24R)

 

- Power Adaptor

 

- CD with User’s Manual

 

- QIG

 

- Mounting Set

 

- Special Screw Set

Certifications:

FCC, CE, IC

RADIO FREQUENCY BAND

 

 

 

 

Channel

 

Tx Avg. Power

 

 

Optimal (dBm)

 

 

 

 

802.11a (5.18 ~ 5.825 GHz)

 

Rx Sensitivity Optimal (dBm)

6 Mbps:

27

-95

Image 77
Contents Wireless Access Point / Client Bridge Table of Contents LAN Setup Appendix B Specifications Appendix C Glossary Before you start About This DocumentDifficult-to-wire environments FeaturesAbility to access real-time information Product OverviewWired LAN backup Wireless extensions of Ethernet networksFrequently altered environments Training and educational facilitiesBenefits Hardware Overview Package ContentsSystem Requirement LED Understanding the ENH500 LEDsInstalling the ENH500 InstallationPre-installation Guidelines This completes the installation procedure Wireless Network Modes Access Point ModeAccess Point with WDS Function Mode Client Bridge Mode WDS Bridge Mode Client Router Mode Page Configuring Microsoft Windows Configuring Your Computer for TCP/IPPage Configuring Microsoft Windows Vista Configuring Microsoft Windows XP Click the Network Connections icon Configuring Apple Mac OSLogging into the ENH500 Username and Password Save / Load StatusMain System Log Wireless Client ListDhcp Client Table Connection StatusSystem Switching the Operation Mode Wireless Settings Wireless ConfigurationChannel HT Mode Wireless ModeAccept / Cancel Extension ChannelSave / Cancel Wireless SecuritySuppressed Ssid Station SeparationWDS Client Site SurveyPrefer Bssid Refresh ProfileWireless mode supports 802.11a/n mixed modes. It is Mode MAC AddressFilled in if an AP in the Site Survey is selected Profile 1 WEP Wireless Security SettingsWPA-PSK 3 WPA2-PSK WPA-PSK Mixed 5 WPA 6 WPA2 WPA Mixed Wireless Advanced Settings Shaping Wireless TrafficAggregation ACL Mode Wireless MAC FilterMAC Address Filter AddWDS Link Settings IP Settings LAN SetupSpanning Tree Settings Static IP Router SettingsWAN Settings Type Internet ConnectionAccount Name Domain NameInternet Connection Type Dhcp Dynamic IPGet Automatically From Use These DNS ServersSecondary DNS servers manually That it remains in Auto PPPoE Point-to-Point Protocol over EthernetSpecify the Maximum Transmit Unit size. EnGenius recommends Keep Alive Connect on DemandGet Automatically From ISPPptp Point-to-Point Tunneling Protocol Username Pptp ServerLAN Settings Router Mode VPN Pass Through Port Forwarding DMZ Address DMZDMZ Hosting Administration Management SettingsPort Save / Apply / CancelManagement Vlan Snmp Settings Firmware Upgrade Backup/Restore SettingsTime Settings 10.7 Log Save/Apply / CancelSyslog Log Server IP AddressDiagnostics Access Point Network Configuration ExamplesProperties Select Operation Mode to Client Bridge from SystemWDS Bridge Change your Local Area Network setting to Obtain an IP Select Operation Mode to Client Router from System Internet Service Provider on the WAN Settings Address AutomaticallyQuestion Answer Appendix a TroubleshootingTo Factory Default in the Management Contacting Technical Support Rx Sensitivity Optimal dBm Appendix B SpecificationsChannel Tx Avg. Power Optimal dBm Environment & Mechanical Appendix C Glossary Access PointESS ID Passphrase Simple Network Management Protocol Snmp WPA2 Federal Communication Commission Interference Statement Appendix D Statements of ConformityIndustry Canada Statement Europe Declaration of Conformity 0560 Slovensky Slovak Suomi Finnish