EnGenius Technologies ENH500 user manual Management Vlan, Port, Save / Apply / Cancel

Page 65

Port	if you specify the Port number is 8080, then you will need to enter
	the following http://IP address:8080 to access the web interface.
Save / Apply / Cancel	Press Save / Apply to confirm the changes or Cancel to return
	previous settings.

Pressing Save / Apply will change the settings immediately. It is not reversible unless the settings are changed again or the device is reset.

10.2 Management VLAN

Click on the Management VLAN link under the Management menu. This option allows you to assign a VLAN tag to packets. A VLAN is a group of computers on a network whose software has been configured so that they behave as if they were on a separate Local Area Network (LAN). Computers on a VLAN do not have to be physically located next to one another on the LAN.

Management VLAN ID If your network includes VLANs and if tagged packets need to pass through the Access Point, specify the VLAN ID in this field. If not, select the No VLAN tag radio button.

Accept / Cancel Press Accept to confirm the changes or Cancel to return previous settings.

Please make note of the following:

1.Accept does not apply the changes – you must go to Status -> Save / Load to apply the new settings. Please refer to Chapter 4.1 for more information.

2.If you reconfigure the Management VLAN ID, you may lose connection to the ENH500. Verify the DHCP server can support the reconfigured VLAN ID, and then re-connect to the new IP address.

Image 65

Contents Wireless Access Point / Client Bridge Table of Contents LAN Setup Appendix B Specifications Appendix C Glossary Before you start About This DocumentDifficult-to-wire environments FeaturesAbility to access real-time information Product OverviewWired LAN backup Wireless extensions of Ethernet networksFrequently altered environments Training and educational facilitiesBenefits Hardware Overview Package ContentsSystem Requirement LED Understanding the ENH500 LEDsInstalling the ENH500 InstallationPre-installation Guidelines This completes the installation procedure Wireless Network Modes Access Point ModeAccess Point with WDS Function Mode Client Bridge Mode WDS Bridge Mode Client Router Mode Page Configuring Microsoft Windows Configuring Your Computer for TCP/IPPage Configuring Microsoft Windows Vista Configuring Microsoft Windows XP Click the Network Connections icon Configuring Apple Mac OSLogging into the ENH500 Username and Password Save / Load StatusMain System Log Wireless Client ListDhcp Client Table Connection StatusSystem Switching the Operation Mode Wireless Settings Wireless ConfigurationChannel HT Mode Wireless ModeAccept / Cancel Extension ChannelSave / Cancel Wireless SecuritySuppressed Ssid Station SeparationWDS Client Site SurveyPrefer Bssid Refresh ProfileWireless mode supports 802.11a/n mixed modes. It is Mode MAC AddressFilled in if an AP in the Site Survey is selected Profile 1 WEP Wireless Security SettingsWPA-PSK 3 WPA2-PSK WPA-PSK Mixed 5 WPA 6 WPA2 WPA Mixed Wireless Advanced Settings Shaping Wireless TrafficAggregation ACL Mode Wireless MAC FilterMAC Address Filter AddWDS Link Settings IP Settings LAN SetupSpanning Tree Settings Static IP Router SettingsWAN Settings Type Internet ConnectionAccount Name Domain NameInternet Connection Type Dhcp Dynamic IPGet Automatically From Use These DNS ServersSecondary DNS servers manually That it remains in Auto PPPoE Point-to-Point Protocol over EthernetSpecify the Maximum Transmit Unit size. EnGenius recommends Keep Alive Connect on DemandGet Automatically From ISPPptp Point-to-Point Tunneling Protocol Username Pptp ServerLAN Settings Router Mode VPN Pass Through Port Forwarding DMZ Address DMZDMZ Hosting Administration Management SettingsPort Save / Apply / CancelManagement Vlan Snmp Settings Firmware Upgrade Backup/Restore SettingsTime Settings 10.7 Log Save/Apply / CancelSyslog Log Server IP AddressDiagnostics Access Point Network Configuration ExamplesProperties Select Operation Mode to Client Bridge from SystemWDS Bridge Change your Local Area Network setting to Obtain an IP Select Operation Mode to Client Router from SystemInternet Service Provider on the WAN Settings Address AutomaticallyQuestion Answer Appendix a TroubleshootingTo Factory Default in the Management Contacting Technical Support Rx Sensitivity Optimal dBm Appendix B SpecificationsChannel Tx Avg. Power Optimal dBm Environment & Mechanical Appendix C Glossary Access PointESS ID Passphrase Simple Network Management Protocol Snmp WPA2 Federal Communication Commission Interference Statement Appendix D Statements of ConformityIndustry Canada Statement Europe Declaration of Conformity 0560 Slovensky Slovak Suomi Finnish