EnGenius Technologies ENH500 Configuring Your Computer for TCP/IP, Configuring Microsoft Windows

Page 18

4 Configuring Your Computer for TCP/IP

This chapter describes how to configure the TCP/IP settings on a computer that will be used to configure the ENH500. Because the default operating mode is Client Bridge, an IP address will not be assigned to the computer/notebook. Therefore, follow the steps below to assign an IP address to a client’s Ethernet adapter.

4.1 Configuring Microsoft Windows 7

Use the following procedure to configure a computer running Microsoft Windows 7.

1.In the Start menu search box, type: ncpa.cpl

2.When the Network Connections List appears, right-click the Local Area Connection icon and click Properties.

Image 18

Contents Wireless Access Point / Client Bridge Table of Contents LAN Setup Appendix B Specifications Appendix C Glossary About This Document Before you startAbility to access real-time information FeaturesDifficult-to-wire environments Product OverviewFrequently altered environments Wireless extensions of Ethernet networksWired LAN backup Training and educational facilitiesBenefits Package Contents System RequirementHardware Overview Understanding the ENH500 LEDs LEDInstallation Pre-installation GuidelinesInstalling the ENH500 Wireless Network Modes Access Point Mode This completes the installation procedureAccess Point with WDS Function Mode Client Bridge Mode WDS Bridge Mode Client Router Mode Page Configuring Your Computer for TCP/IP Configuring Microsoft WindowsPage Configuring Microsoft Windows Vista Configuring Microsoft Windows XP Configuring Apple Mac OS Click the Network Connections iconLogging into the ENH500 Username and Password Status Save / LoadMain Wireless Client List System LogConnection Status Dhcp Client TableSystem Switching the Operation Mode Wireless Configuration Wireless SettingsAccept / Cancel Wireless ModeChannel HT Mode Extension ChannelSuppressed Ssid Wireless SecuritySave / Cancel Station SeparationSite Survey Prefer BssidWDS Client Profile RefreshWireless mode supports 802.11a/n mixed modes. It is MAC Address ModeFilled in if an AP in the Site Survey is selected Profile Wireless Security Settings 1 WEPWPA-PSK 3 WPA2-PSK WPA-PSK Mixed 5 WPA 6 WPA2 WPA Mixed Wireless Advanced Settings Wireless Traffic AggregationShaping MAC Address Filter Wireless MAC FilterACL Mode AddWDS Link Settings LAN Setup IP SettingsSpanning Tree Settings Router Settings WAN SettingsStatic IP Account Name Internet ConnectionType Domain NameGet Automatically From Dhcp Dynamic IPInternet Connection Type Use These DNS ServersSecondary DNS servers manually PPPoE Point-to-Point Protocol over Ethernet Specify the Maximum Transmit Unit size. EnGenius recommendsThat it remains in Auto Get Automatically Connect on DemandKeep Alive From ISPPptp Point-to-Point Tunneling Protocol Pptp Server UsernameLAN Settings Router Mode VPN Pass Through Port Forwarding DMZ DMZ HostingDMZ Address Management Settings AdministrationSave / Apply / Cancel Management VlanPort Snmp Settings Backup/Restore Settings Firmware UpgradeTime Settings Syslog Save/Apply / Cancel10.7 Log Log Server IP AddressDiagnostics Network Configuration Examples Access PointSelect Operation Mode to Client Bridge from System PropertiesWDS Bridge Internet Service Provider on the WAN Settings Select Operation Mode to Client Router from SystemChange your Local Area Network setting to Obtain an IP Address AutomaticallyAppendix a Troubleshooting To Factory Default in the ManagementQuestion Answer Contacting Technical Support Appendix B Specifications Channel Tx Avg. Power Optimal dBmRx Sensitivity Optimal dBm Environment & Mechanical Access Point Appendix C GlossaryESS ID Passphrase Simple Network Management Protocol Snmp WPA2 Appendix D Statements of Conformity Federal Communication Commission Interference StatementIndustry Canada Statement Europe Declaration of Conformity 0560 Slovensky Slovak Suomi Finnish