EnGenius Technologies EOC2611P manual Introduction, Features

Page 6

EnGenius EOC2611P

Version 1.0

1 Introduction

EOC2611P is a long range outdoor wireless Access Point / Client Bridge that operates seamlessly in the 2.4GHz frequency spectrum and provides high bandwidth up to 108Mbps with Super G. With dual polarization antenna, it features high transmitted output power and high receivable sensitivity. High output power and high sensitivity can extend range and coverage to reduce the roaming between Access Points to get a more stable wireless connection. It also reduces the expense of equipment in the same environment. With IPx4 protection, it can provide effective in keeping out water.

It supports distance control by 1km to 30km and RSSI indicator which enables the best transmit and receive signals for traffic communication. This product comes with PoE injector for building in outdoor environment easily.

To protect your wireless connectivity, it can encrypt all wireless transmissions through 64/128/152‐bit WEP data encryption and also supports WPA/WPA2. The MAC address filter lets you select exactly which stations should have access to your network. In addition, the User Isolation function can protect the private network between client users.

The attractive design, high performance, and array of features make EOC2611P a suitable wireless solution for your residence or office.

1.1 Features

Wireless

¾High output power Transmit high output power programmable for different country selections

¾10dBi Internal Antenna Built‐in 10dBi Dual Polarization Antenna for superior performance

¾External Antenna SMA connector to attach higher gain antenna

¾High Data Rate High speed transmitting rate up to 54Mbps, support large payload

¾Multifunction application Access Point/Client Bridge/Client Router/WDS Bridge

¾Long range transmitting Transmit power control and distance control (ACK timeout)

¾Narrow Bandwidth Provides 5MHz/10MHz/20MHz bandwidth selection

¾Signal Strength Display RF signal strength status shown with 3 color LEDs for easy deployment to find the best signal reception.

¾Multiple SSID 4 SSID supported. Each SSID can set itself wireless or WAN access setting

¾AP Detection Scan all neighboring APs with their channels and signal strength

¾QoS(WMM) Enhance performance and density

Networking

¾PPPoE Point‐to‐Point Protocol over Ethernet in Client Router mode.

¾PPTP Point‐to‐Point Tunneling Protocol (PPTP) is a method for implementing virtual private networks

¾VPN Pass Through

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents EOC2611P Table of Contents 1.1 Appendix B IC Statement Version Date Remark Features IntroductionPackage Contents System RequirementsDifficult‐to‐wire environments ApplicationsHardware Installation Hardware DescriptionIP Address Configuration Mounting KitsEnGenius EOC2611P Version Switching Between Operating Modes LoggingAccess Point Operating Mode Status MainWireless Client List System LogSystem System PropertiesIP Settings Spanning Tree Settings Wireless Wireless NetworkEnGenius EOC2611P Version ` Wireless Security Security Mode WEP EnGenius EOC2611P Version ` Wireless Security Security Mode WPA, WPA2, WPA Mixed Wireless MAC Filter WDS Link Settings Wireless Advanced Settings Administration ManagementManagement Vlan Snmp Settings Backup/Restore settings, Reset to factory default settings Firmware Upgrade Time SettingsDiagnostics 7 LogClient Bridge Operating Mode EnGenius EOC2611P Version Connection Status System IP Settings Spanning Tree Settings Wireless Wireless Security Wireless Security WEP Wireless Security WPA‐PSK Wireless Security WPA2‐PSK Wireless Advanced Settings Management Snmp Settings Backup/Restore settings, Reset to factory default settings Firmware Upgrade 6 Log Diagnostics WDS Bridge Operating Mode EnGenius EOC2611P Version WDS Link Status System IP Settings Spanning Tree Settings Wireless WDS Link Settings WDS Security Wireless Advanced Settings Management Snmp Settings Backup/Restore settings, Reset to factory default settings Firmware Upgrade 6 Log Diagnostics Status Dhcp Client Table Connection Status EnGenius EOC2611P Version System WAN Settings WAN DhcpWAN Static IP WAN PPPoE WAN Pptp EnGenius EOC2611P Version LAN Settings VPN Pass ThroughWireless Wireless Security Wireless Security WPA‐PSK, WPA2‐PSK Wireless Advanced Settings Management Snmp Settings Backup/Restore settings, Reset to factory default settings Firmware Upgrade 6 Log Diagnostics Appendix a FCC Interference Statement Federal Communication Commission Interference StatementIndustry Canada statement Radiation Exposure Statement

EOC2611P specifications

EnGenius Technologies EOC2611P is a powerful outdoor wireless access point designed to provide robust and reliable long-range connectivity for various applications. This device is particularly popular for its versatility in serving both small and large enterprises, outdoor venues, and extensive campuses. The EOC2611P is engineered with several key features and technologies that enable it to perform admirably in diverse environments.

One of the standout features of the EOC2611P is its strong transmission power, capable of reaching up to 27 dBm. This high output allows the device to cover expansive areas with a stable signal, making it perfect for outdoor installations. The EOC2611P also supports a dual-band frequency of 2.4GHz and 5GHz, enabling it to effectively manage multiple connections and reduce interference. This dual-band capability helps ensure that users experience high-speed wireless access, even in densely populated environments.

The EOC2611P is equipped with advanced MIMO (Multiple Input Multiple Output) technology, which enhances data throughput and signal reliability. By utilizing multiple antennas, MIMO improves the performance of the wireless network, particularly in environments where obstacles are present. This results in better coverage, higher data rates, and the ability to support more simultaneous connections.

In terms of durability, the EOC2611P is rated IP55, making it resistant to dust and water. This rugged design ensures that the access point can withstand harsh weather conditions, enabling it to perform consistently in various outdoor settings. Additionally, the device features a compact and lightweight design, which simplifies installation on poles, buildings, or any outdoor structures.

The EOC2611P incorporates essential security protocols such as WPA/WPA2 encryption to protect network data from unauthorized access. This security feature is crucial for businesses and organizations that handle sensitive information.

Moreover, EnGenius Technologies has included advanced management features in the EOC2611P. The device can be easily configured through a web interface, allowing IT administrators to manage network settings with ease. It also supports Power over Ethernet (PoE), facilitating flexible installation by allowing the device to receive power and data through a single cable.

In conclusion, the EnGenius Technologies EOC2611P is an excellent choice for those seeking a reliable outdoor wireless solution with extensive coverage and robust performance. Its combination of powerful transmission capabilities, dual-band support, advanced MIMO technology, rugged durability, and strong security features make it ideal for a wide array of outdoor networking applications.
Top Page Image Contents