EnGenius Technologies EOC2611P manual Snmp Settings

Page 62

EnGenius EOC2611P

Version 1.0

6.5.2 SNMP Settings

This option allows you to assign the contact details, location, and community name and trap settings for SNMP. This is a networking management protocol used to monitor network‐attached devices. SNMP allows messages (called protocol data units) to be sent to various parts of a network. Upon receiving these messages, SNMP‐compatible devices (called agents) return data stored in their Management Information Bases. .

SNMP Enable/Disable: Choose to enable or disable the SNMP feature.

Contact: Specify the contact details of the device.

Location: Specify the location of the device.

Read‐Only Community Name: Specify the password for access the SNMP community for read only access.

Read‐Write Community Name: Specify the password for access to the SNMP community with read/write access.

Trap Destination IP Address: Specify the IP address of the computer that will receive the SNMP traps.

Trap Destination Community Name: Specify the password for the SNMP trap community.

Click on the Apply button to save the changes.

62

Image 62

Contents EOC2611P Table of Contents 1.1 Appendix B IC Statement Version Date Remark Features IntroductionPackage Contents System RequirementsDifficult‐to‐wire environments ApplicationsHardware Installation Hardware DescriptionIP Address Configuration Mounting KitsEnGenius EOC2611P Version Switching Between Operating Modes LoggingAccess Point Operating Mode Status MainWireless Client List System LogSystem System PropertiesIP Settings Spanning Tree Settings Wireless Wireless NetworkEnGenius EOC2611P Version ` Wireless Security Security Mode WEP EnGenius EOC2611P Version ` Wireless Security Security Mode WPA, WPA2, WPA Mixed Wireless MAC Filter WDS Link Settings Wireless Advanced Settings Administration ManagementManagement Vlan Snmp Settings Backup/Restore settings, Reset to factory default settings Firmware Upgrade Time SettingsDiagnostics 7 LogClient Bridge Operating Mode EnGenius EOC2611P Version Connection Status System IP Settings Spanning Tree Settings Wireless Wireless Security Wireless Security WEP Wireless Security WPA‐PSK Wireless Security WPA2‐PSK Wireless Advanced Settings Management Snmp Settings Backup/Restore settings, Reset to factory default settings Firmware Upgrade 6 Log Diagnostics WDS Bridge Operating Mode EnGenius EOC2611P Version WDS Link Status System IP Settings Spanning Tree Settings Wireless WDS Link Settings WDS Security Wireless Advanced Settings Management Snmp Settings Backup/Restore settings, Reset to factory default settings Firmware Upgrade 6 Log Diagnostics Status Dhcp Client Table Connection Status EnGenius EOC2611P Version System WAN Settings WAN DhcpWAN Static IP WAN PPPoE WAN Pptp EnGenius EOC2611P Version LAN Settings VPN Pass ThroughWireless Wireless Security Wireless Security WPA‐PSK, WPA2‐PSK Wireless Advanced Settings Management Snmp Settings Backup/Restore settings, Reset to factory default settings Firmware Upgrade 6 Log Diagnostics Appendix a FCC Interference Statement Federal Communication Commission Interference StatementIndustry Canada statement Radiation Exposure Statement