EnGenius Technologies EOC2611P manual Status

Page 67

7 Client Router Operating Mode

7.1 Logging In

After logging in you will graphical user interface (GUI) of the device. The navigation drop‐down menu on left is divided into four sections:

1.Status: Displays the overall status, DHCP client table, connection status and system log.

2.System: This menu includes the system properties.

3.Router: This includes WAN, LAN, and VPN settings.

4.Wireless: This menu includes wireless network, security and advanced settings.

5.Management: This menu includes the admin setup, SNMP settings, firmware upgrade, save/restore backup, time setting and diagnostics.

7.2Status

Under the Status section of the left menu, you will see the following options: Main, DHCP Client Table, Connection Status and System Log. Each option is described in detail below.

Image 67

Contents EOC2611P Table of Contents 1.1 Appendix B IC Statement Version Date Remark Introduction FeaturesSystem Requirements Package ContentsApplications Difficult‐to‐wire environmentsHardware Description Hardware InstallationMounting Kits IP Address ConfigurationEnGenius EOC2611P Version Logging Switching Between Operating ModesAccess Point Operating Mode Main StatusSystem Log Wireless Client ListSystem Properties SystemIP Settings Spanning Tree Settings Wireless Network WirelessEnGenius EOC2611P Version ` Wireless Security Security Mode WEP EnGenius EOC2611P Version ` Wireless Security Security Mode WPA, WPA2, WPA Mixed Wireless MAC Filter WDS Link Settings Wireless Advanced Settings Management AdministrationManagement Vlan Snmp Settings Backup/Restore settings, Reset to factory default settings Time Settings Firmware Upgrade7 Log DiagnosticsClient Bridge Operating Mode EnGenius EOC2611P Version Connection Status System IP Settings Spanning Tree Settings Wireless Wireless Security Wireless Security WEP Wireless Security WPA‐PSK Wireless Security WPA2‐PSK Wireless Advanced Settings Management Snmp Settings Backup/Restore settings, Reset to factory default settings Firmware Upgrade 6 Log Diagnostics WDS Bridge Operating Mode EnGenius EOC2611P Version WDS Link Status System IP Settings Spanning Tree Settings Wireless WDS Link Settings WDS Security Wireless Advanced Settings Management Snmp Settings Backup/Restore settings, Reset to factory default settings Firmware Upgrade 6 Log Diagnostics Status Dhcp Client Table Connection Status EnGenius EOC2611P Version System WAN Dhcp WAN SettingsWAN Static IP WAN PPPoE WAN Pptp EnGenius EOC2611P Version VPN Pass Through LAN SettingsWireless Wireless Security Wireless Security WPA‐PSK, WPA2‐PSK Wireless Advanced Settings Management Snmp Settings Backup/Restore settings, Reset to factory default settings Firmware Upgrade 6 Log Diagnostics Federal Communication Commission Interference Statement Appendix a FCC Interference StatementRadiation Exposure Statement Industry Canada statement