EnGenius Technologies EOC2611P manual Management

Page 82

EnGenius EOC2611P

Version 1.0

7.6 Management

Under the Management section of the left menu, you will find the following options: Administration, SNMP

Settings, Backup/Restore Settings, Firmware Upgrade, Time Settings, Log and Diagnostics. Each option is described below.

7.6.1 Administration

This option allows you to create a user name and password for the device. By default, this device is configured with a user name admin and password admin. For security reasons it is highly recommended that you create a new user name and password.

Name: Specify a user name into the first field.

Password: Specify a password into this field and then re‐type the password into the Confirm Password field.

Remote Management: Choose to enable or disable remote management.

Remote Upgrade: Choose to enable or disable remote firmware upgrade.

Remote Management Port: Specify a port for remote management. For example, if you specify 8080, then you will need to specify <IP address>:<port> http://192.168.1.1:8080 to connect to the web interface of the device.

Click on the Apply button to save the changes.

82

Image 82

Contents EOC2611P Table of Contents 1.1 Appendix B IC Statement Version Date Remark Features IntroductionPackage Contents System RequirementsDifficult‐to‐wire environments ApplicationsHardware Installation Hardware DescriptionIP Address Configuration Mounting KitsEnGenius EOC2611P Version Switching Between Operating Modes LoggingAccess Point Operating Mode Status MainWireless Client List System LogSystem System PropertiesIP Settings Spanning Tree Settings Wireless Wireless NetworkEnGenius EOC2611P Version ` Wireless Security Security Mode WEP EnGenius EOC2611P Version ` Wireless Security Security Mode WPA, WPA2, WPA Mixed Wireless MAC Filter WDS Link Settings Wireless Advanced Settings Administration ManagementManagement Vlan Snmp Settings Backup/Restore settings, Reset to factory default settings Firmware Upgrade Time SettingsDiagnostics 7 LogClient Bridge Operating Mode EnGenius EOC2611P Version Connection Status System IP Settings Spanning Tree Settings Wireless Wireless Security Wireless Security WEP Wireless Security WPA‐PSK Wireless Security WPA2‐PSK Wireless Advanced Settings Management Snmp Settings Backup/Restore settings, Reset to factory default settings Firmware Upgrade 6 Log Diagnostics WDS Bridge Operating Mode EnGenius EOC2611P Version WDS Link Status System IP Settings Spanning Tree Settings Wireless WDS Link Settings WDS Security Wireless Advanced Settings Management Snmp Settings Backup/Restore settings, Reset to factory default settings Firmware Upgrade 6 Log Diagnostics Status Dhcp Client Table Connection Status EnGenius EOC2611P Version System WAN Settings WAN DhcpWAN Static IP WAN PPPoE WAN Pptp EnGenius EOC2611P Version LAN Settings VPN Pass ThroughWireless Wireless Security Wireless Security WPA‐PSK, WPA2‐PSK Wireless Advanced Settings Management Snmp Settings Backup/Restore settings, Reset to factory default settings Firmware Upgrade 6 Log Diagnostics Appendix a FCC Interference Statement Federal Communication Commission Interference StatementIndustry Canada statement Radiation Exposure Statement