Enterasys Networks G3G170-24, G3G124P-24 Unpacking the G-Series Switch, Shipped With the Switch

Unpacking the G-Series Switch

Unpacking the G-Series Switch

Note: Unpack the G-Series Ethernet switch components only as needed. Leave the components in their respective shipping cartons until you are ready to install that component. Save all shipping materials in the event that the chassis has to be repacked.

Shipped With the Switch

Inspect the contents for any signs of physical damage. Contact Enterasys Networks if it is damaged. Refer to “Getting Help” on page xvii for details. The contents of the package includes:

•G‐Series Ethernet switch

•Rack mount installation kit

Note: Be sure to retain the rack mount installation kit for possible future use.

•RJ45 to DB9 adapter (for use with the RJ45 console port if necessary)

•Self‐adhesive rubber feet

•Various documentation

Required and Shipped Separately

Required components shipped separately from the G‐Series Ethernet switch include the following:

•At least one power supply module

Optional Enterasys Components

Optional components you may purchase for the G‐Series Ethernet switch include the following:

•An additional power supply module for redundancy, either G3‐PWR (400‐watt AC) or G3‐PWR‐POE (1200‐watt AC recommended for PoE)

Note: G-Series 400-watt and 1200-watt power supply modules can be added to and combined on the same switch. Redundancy, however, will only be supported to the lowest common amount of power. For example, a 1200-watt module added to a switch with a 400-watt module would yield a 400-watt redundant solution.

•A PoE module (G3G‐POE) for installation in the G3G124‐24 base unit or the G3G‐24TX IOM.

•One or more IOMs:

–G3G‐24TX, a 24‐10/100/1000 copper port and 2 combo port SFP module

–G3G‐24SFP, a 24‐port SFP module

–G3K‐2XFP, a 2‐port XFP module

–G3K‐4XFP, a 4‐port XFP module

2-2 Installation