Enterasys Networks G3G170-24 About This Guide, Who Should Use This Guide, How to Use This Guide

About This Guide

This guide provides an overview, specifications and instructions for installing the Enterasys®

G‐Series Ethernet Switch in a standard 19‐inch equipment rack, or on a suitable flat surface. This guide also explains how to interpret the system status LEDs to facilitate troubleshooting when necessary, and also provides information on how to contact Enterasys Networks for additional help.

Who Should Use This Guide

Electrical Hazard: Only qualified personnel should install or service this unit.

Riesgo Electrico: Nada mas personal capacitado debe de instalar o darle servicio a esta unida.

Elektrischer Gefahrenhinweis: Installationen oder Servicearbeiten sollten nur durch ausgebildetes und qualifiziertes Personal vorgenommen werden.

This guide is intended for a network administrator who is responsible for installing and setting up the G‐Series switch.

How to Use This Guide

Read through this guide completely to familiarize yourself with its contents and to gain an understanding of the features and capabilities of the G‐Series switch. A general working knowledge of data communications networks is helpful.

For information about...	Refer to...
An overview of the G-Series chassis	Chapter 1, Introduction
Instructions to install the G-Series chassis hardware	Chapter 2, Installation
Troubleshooting installation problems and diagnosing	Chapter 3, Troubleshooting
network/operational problems
Specifications, environmental requirements, and physical	Appendix A, Specifications
properties of the G-Series.

Related Documents

To configure the G‐Series switch, refer to the Enterasys G‐Series Configuration Guide.

Manuals can be accessed on the World Wide Web, using the following URL:

http://www.enterasys.com/support/manuals/

Enterasys G-Series Hardware Installation Guide xiii