Enterasys Networks G3G124-24, G3G170-24 Table A-5 Recommended Torque Values by Screw Size

Torque Values

Table A-4 G3K-2TX and G3K-4TX IOM Specifications (continued)

Item	Specification
Thermal Output	Same as Power Consumption (above)
Environmental
Operating Temperature	0°C to 50°C (32°F to 122°F)
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Operating Relative Humidity	5% to 95% (non-condensing)

Torque Values

The following table describes the recommended torque values to use when installing the G‐Series switch using standard threaded fastener machine screws and bolts.

Table A-5 Recommended Torque Values by Screw Size

Screw Size			Torque in Pounds		Bit Size
English	Metric	-%5	Nominal	+%5
N/A	N/A	1.42	1.5	1.57	0
2 – 56	1.5	2.85	3.0	3.15	0
4 – 40	2.5	4.75	5.0	5.25	0/1
6 – 32	3.5	8.55	9.0	9.45	1
8 – 32	4.5	17.10	18.0	18.90	2
10 – 32	5	30.40	32.0	33.60	2
1/4 – 20	6.5	63.65	67.0	70.35	3

1-Gigabit Ethernet and 100Base-FX Transceiver (SFP) Specifications

The G3 SFP (Mini‐GBIC) port interface slots support 1‐Gbps fiber‐optic and copper connections as described in Table A‐6. These optional Mini‐GBICs are hot swappable.

Table A-6 Mini-GBIC Input/Output Port Specifications

Item	Specification
	1	LC fiber-optic multimode port that is compliant with the 1000BASE-SX
MGBIC-LC01	standard and has an LC connector.
	1	MT-RJ fiber-optic multi-mode port that is compliant with the 1000BASE-SX
MGBIC-MT01	standard and has an MT-RJ connector.
	1	RJ45 copper connection that is compliant with the 1000BASE-T standard
MGBIC-02	and has an RJ45 connector.
	1	LC fiber-optic multimode port that is compliant with the 1000BASE-SX
MGBIC-LC03	standard and has an LC duplex style connector.
	1	LC fiber-optic multimode port that is compliant with the 100BASE-FX
MGBIC-LC04	standard and has an LC connector.

Enterasys G-Series Hardware Installation Guide A-5