Enterasys Networks G3G124-24P, G3G170-24 manual MGBIC-LC03 Specifications 1000BASE-SX

1-Gigabit Ethernet and 100Base-FX Transceiver (SFP) Specifications

MGBIC-LC03 Specifications (1000BASE-SX)

Table A-10 MGBIC-LC03 Optical Specifications

Item	62.5/125 µm MMF	50/125 µm MMF
Transmit Power (minimum)	-9.5 dBm	-9.5 dBm
Transmit Power (maximum)	-3 dBm	-3 dBm
Receive Sensitivity	-20 dBm	-20 dBm
Link Power Budget1
(Multimode Only)	10.5 dB	10.5 dB

1.The maximum drive distance (up to 2 km) depends on the quality of the installed multimode fiber-optic cable segment. Use the Link Power Budget to calculate the maximum cable length of the attached segment. The Link Power Budget must not exceed those specified in this table. The MGBIC-LC03 input power must not exceed -3 dBm. Otherwise, saturation could occur.

Table A-11 MGBIC-LC03 Operating Range

Item	Modal Bandwidth @ 1310 nm	Range
62.5 µm MMF	160 MHz/km	2,000 Meters
50 µm MMF	400 MHz/km	2,000 Meters

MGBIC-LC04 Specifications (100BASE-FX)

Table A-12 MGBIC-LC04 Optical Specifications

Item	62.5 µm MMF	50 µm MMF
Transmit Power (minimum)	-20 dBm	-23.5 dBm
Receive Sensitivity	-31 dBm	-31 dBm
Link Power Budget1 (Multimode Only)	11 dBm	7.5 dBm

1.The maximum drive distance (up to 2 km) depends on the quality of the installed multimode fiber-optic cable segment. Use the Link Power Budget to calculate the maximum cable length of the attached segment. The Link Power Budget must not exceed those specified in this table.

Table A-13 MGBIC LC04 Operating Range

Item	1310 nm	Range
9 or 10 µm SMF	N/A	2,000 Meters

Enterasys G-Series Hardware Installation Guide A-7