Enterasys Networks G3G170-24, G3G124-24P manual MGBIC-LC01/MGBIC-MT01 Specifications 1000BASE-SX

1-Gigabit Ethernet and 100Base-FX Transceiver (SFP) Specifications

Table A-6 Mini-GBIC Input/Output Port Specifications (continued)

Item	Specification
	1	LC fiber-optic single-mode port that is compliant with the 100BASE-FX
MGBIC-LC05	standard and has an LC connector.
	1	LC fiber-optic single-mode port that is compliant with the 1000BASE-ELX
MGBIC-LC07	standard and has an LC connector.
	1	LC fiber-optic single-mode port that is compliant with the 1000BASE-ELX
MGBIC-08	standard and has an LC connector.
	1	LC fiber-optic single-mode port that is compliant with the 1000BASE-LX
MGBIC-LC09	standard and has an LC connector.

The specifications for the Mini‐GBICs shown in Table A‐7 through Table A‐21 meet or exceed the IEEE 802.3z‐1998 standard.

MGBIC-LC01/MGBIC-MT01 Specifications (1000BASE-SX)

Table A-7 MGBIC-LC01/MGBIC-MT01 Optical Specifications

Item	62.5 µm MMF	50 µm MMF
Transmit Power (minimum)	-9.5 dBm	-9.5 dBm
Receive Sensitivity	-17 dBm	-17 dBm
Link Power Budget	7.5 dBm	7.5 dBm

Table A-8 MGBIC-LC01/MGBIC-MT01 Operating Range

Item	Modal Bandwidth @ 850 nm	Range
62.5 µm MMF	160 MHz/km	2-220 Meters
62.5 µm MMF	200 MHz/km	2-275 Meters
50 µm MMF	400 MHz/km	2-500 Meters
50 µm MMF	500 MHz/km	2-550 Meters

MGBIC-02 Specifications (1000BASE-T)

Table A-9 MGBIC-02 Specifications

Item	Specification
Supported Cable
Type:	Copper, Category 5 UTP
Maximum Length	Up to 100 meters
Connector	RJ45
	1 Gbps, IEEE 802.3:2000 compatible
	1000BASE-T operation only
Data Rate	Automatic crossover detection
TX Output impedance	100 ohms, typical at all frequencies between 1 MHz and 125 MHz
RX Input impedance	100 ohms, typical at all frequencies between 1 MHz and 125 Hz

A-6 Specifications