Installing Optional
Installation
To install a Mini‐GBIC that has an RJ45 connector, refer to Figure 3‐1; for a Mini‐GBIC with a MT‐RJ connector, refer to Figure 3‐2; for a Mini‐GBIC with an LC connector, refer to Figure 3‐3; and proceed as follows:
1.Hold the Mini‐GBIC with the top side positioned as shown, and the 7‐pin edge connector facing the port slot.
2.Align the Mini‐GBIC with the port slot.
3.If you are using the RJ45 Mini‐GBIC as in Figure 3‐1, be sure the release tab is in the up position.
4.Push the Mini‐GBIC into the port slot until the Mini‐GBIC “clicks” and locks into place.
Figure 3-1 Mini-GBIC with RJ45 Connector
25 |
|
26 | 25/Up |
27 | |
28 | 26/Down |
|
Ã
Á
Â
Stack
| A2H124- |
28 | 24FX |
À
1 | SFP Slot | 3 | Release tab |
2 | 4 | Link/Activity LED |