Eaton Electrical 34003991EN/EB Administration, Network, Environment sensor, List of ports used

Page 11

1.3.4 Administration

Up to 35 workstations(in TCP connected mode) or up to 100(in UDP broadcasted mode) protected by Network Shutdown Modules - Central or local configuration.

Up to 5 browsers connected at the same time (3 in SSL).

Minimum recommended browser versions: Internet Explorer 6.x / 7.0, Mozilla Firefox 1.5 / 2.0 / 3.0 E-mail sending configurable according to UPS alarms and transmission of a periodical report. Control of UPS on/off switching via the HTML interface.

Adjustment and control of PowerShare outlets via the HTML interface, sequential starting of the installation and optimisation of backup time by shutting down non-priority systems.

Automatic data and time adjustment via NTP server.

Protection by encrypted password.

Protection by secure SSL connection.

Saving of logs in the non-volatile memory.

Languages available: English/French/Spanish/German/Italian.

On-line help in English available for each page.

Card firmware updated via the network.

Card Mass settings via the network with the NMC tool.

1.3.5 Network

◗Fast ETHERNET 10/100 Mbits compatibility with auto-negotiation on the RJ45 outlet.

1.3.5.1 List of ports used

◗	BootP, DHCP	UDP 68, 67
◗	HTML	TCP 80
◗	SSL	TCP 443
◗ NSM in connected mode		TCP 5000
◗	NSM in broadcasted	UDP 4679 and 4680
◗	SMTP	25
◗	NTP	123
◗	SNMP V1	161
◗	TRAP SNMP	162

1.3.6 Environment sensor

◗Temperature measurement from 0 to 70 °C with +/- 1 °C accuracy.

◗Measurement of humidity from 0 to 100 % with +/- 6 % accuracy.

◗Min / max time-stamped function for temperature and humidity.

◗Choice of temperature readings in Celsius or Fahrenheit.

◗High and low thresholds, hysteresis and offset adjustable via Web interface.

◗Possibility of notification of status changes by e-mail, SMS or SNMP trap.

◗Position detection of 2 dry contacts (maximum sensor/contact distance: 20 m).

◗Name and status of each configurable contact.

Network Management Card – User Manual

34003991EN/EB

Page 11/118

Image 11

Contents Network Management Card Contents Industrial Network Management Card Inmc Option Configuration VIA RS232Server Protection Glossary Jbus TableAppendices MGE MIBGeneral Presentation Eaton Network SolutionProtection of the computers/servers Connecting the UPS to the Ethernet networkConnection Supervision of the UPSs over the networkCompatibility with UPSs How to connect UPS / agent / networkSetting up the protection Presentation of the Network Management Card NMCEnvironment Sensor option Direct sending of E-mailSending text messages SMS EMC Compatibility Technical dataHardware characteristics ConfigurationList of ports used AdministrationNetwork Environment sensorMIB Management Information Base BOOTP/DHCP Default parametersIndications InstallationUnpacking and check on contents ACT Installation in the UPSLED Sensor installation option Eaton Network Management Card ConfigurationConfigure IP parameters Your network is equipped with a Dhcp server Your network is not equipped with a Dhcp server Test after configurationOptimising the performance of your browser Supervision and administration by browserUPS properties UPSUPS zone general information on the UPS 23/118 24/118 25/118 26/118 UPS status zone Essential information Viewing the modules 29/118 Viewing the alarms Alarm table for modular UPS Viewing the About your UPS window On-line help UPS control 35/118 36/118 UPS weekly schedule programming Shutdown parameters For the main outlet Master by default Measurements Event log System log Email Notification Notification44/118 Mail Message Settings 46/118 Configuration Network settings 49/118 System 51/118 Notified Applications 53/118 Central shutdown configuration 55/118 Access controlTLS Date and time 58/118 Firmware upload Environment Sensor option CharacteristicsEnvironment Status Environment Settings Display in the list of current alarms 4 Log Shutdown criteria managed by the Network Management Card Server protectionSet-up of the shutdown parameters Utility failure Start of the shutdown sequence Shutdown duration Shutdown when backup time is less thanLoad shedding or sequential shutdown Controlled outletsProtection of a server connected to a controlled outlet Sequential startup Different server and UPS shutdown sequences70/118 Shutdown Duration SettingsShutdown management with 2 NMC boards Configuration via RS232 Choice 1 Read Network settings Choice 1 Restart / ResetChoice 2 Network Configuration Choice 3 Set Ethernet speed Choice 2 Modify Network settingsChoice 3 Lost password / Set Login Password to Default Choice 4 Return to Default Configuration Overview Functions Industrial Network Management Card Inmc optionPresentation JBUS/MODBUS Technical characteristics1 RS232 link configuration and connection Installation2.1 RS485 connection 2 RS485 link configuration and connection81/118 2.2 RS485 link configuration for 2 wires connexion 83/118 2.3 RS485 link configuration for 4 wires connexion 85/118 Configuration of the JBUS/MODBUS communication parameters Choice 2 Modify Jbus settings Choice 1 Display Jbus settingsChoice 5 Return to Jbus Default Configuration Choice 3 Display Jbus diagnosticsChoice 4 Reset Jbus diagnostics Choice 6 Display Jbus frames Additional Web pages Status table Jbus tableData for Pulsar 700 / 1000 Measurements table Data for Pulsar M 2200 94/118 Data for Pulsar MX 4000 / 5000 / 10000 and EX 5 / 7 / 11 RT 96/118 Data for Pulsar MX frame 15 Modular fault table 99/118 100/118 101/118 5.1 Status table Sensor data103/118 Read of the personalization table Other data Appendices Tables of alarms and eventsTable of alarms UPS OK If the UPS is modular UPS, for each module Table of UPS events 110/118 Table of system alarms MGE MIB Snmp objects113/118 1yes 2no 1,4,1 MIB Trap Table des Traps116/118 Network Management Proxy GlossaryMIB Management Information Base Smtp Simple Mail Transfer Protocol NMS Network Management Station SnmpNSM Network Shutdown Module Snmp Simple Network Management Protocol