Eaton Electrical 34003991EN/EB user manual Contents

Contents

1	EATON NETWORK SOLUTION		5
1.1	GENERAL PRESENTATION		5
1.1.1	Connecting the UPS to the Ethernet network		6
1.1.2	Protection of the computers/servers		6
1.1.3	Supervision of the UPSs over the network		7
1.1.4	Connection		7
1.2	PRESENTATION OF THE NETWORK MANAGEMENT CARD (NMC)		8
1.2.1	Compatibility with UPSs		8
1.2.2	Direct sending of E-mail		9
1.2.3	Sending text messages (SMS)		9
1.2.4	Compatibility with the Network Management Systems (NMS) – Trap sending		9
1.2.5	Environment Sensor (option)		9
1.3	TECHNICAL DATA		10
1.3.1	Hardware characteristics		10
1.3.2	EMC Compatibility		10
1.3.3	Configuration		10
1.3.4	Administration		11
1.3.5	Network		11
1.3.6	Environment sensor		11
1.3.7	MIB (Management Information Base)		12
1.3.8	Default parameters		13
2	INSTALLATION		14
2.1	UNPACKING AND CHECK ON CONTENTS		14
2.2	INDICATIONS		14
2.3	INSTALLATION IN THE UPS		15
2.4	SENSOR INSTALLATION (OPTION)		16
3	CONFIGURATION		17
3.1	CONFIGURE IP PARAMETERS		17
3.1.1	Your network is equipped with a DHCP server		18
3.1.2	Your network is not equipped with a DHCP server		19
3.2	TEST AFTER CONFIGURATION		19
4	SUPERVISION AND ADMINISTRATION BY BROWSER		20
4.1	OPTIMISING THE PERFORMANCE OF YOUR BROWSER		20
4.2	UPS		21
4.2.1	UPS properties page		21
4.2.2	On-line help		33
4.2.3	UPS control		34
4.2.4	UPS weekly schedule programming		37
4.2.5	Shutdown parameters		38
4.2.6	Measurements		40
4.2.7	Event log		41
4.2.8	System log		42
4.3	NOTIFICATION		43
Network Management Card – User Manual		34003991EN/EB	Page 2/118