Swann H.264 manual Layout of the DVR4-2550

Layout of the DVR4-2550

9 10 11 12 13 14 18 1 2 3 4 5 6 7 8

15 16

10)Pause: During playback, will pause the current recording and leave a still- frame on screen. In live-viewing mode, this will activate the auto-sequence mode, where the display automatically cycles through the available camera signals (this must be correctly configured and enabled to function correctly).

11)Play: If pressed in live-viewing mode, this will take you directly into playback mode, and begin playing the most recent recording. In playback mode, use it to resume playback after pausing or stopping a recording.

12)Fast-Forward:During playback, this will speed up the footage. Press multiple times to increase the speed of the playback. When navigating through menus, this button will move the cursor to the right.

1719

13)Stop: In playback mode, pressing this button will stop playback.

14)Record: Press to immediately start recording. This acts as a manual override to the schedule and motion recording modes. For a channel to be recorded in this mode (or any other) it must listed as ‘active’ in the Camera Setup and Record Setup menus.

15 ~ 18) Arrows: Move the cursor in the selected direction in the menus.

19)Select: The equivalent of Enter/ Return on a computer keyboard. Use this button to (as the name suggests) select an option in the menus, or to confirm an entry.

9