Swann H.264 manual PTZ Menu

Page 48

PTZ Menu

This is where you configure the DVR to act as the controller for a PTZ capable camera system. PTZ devices are connected via the RS485 connection on the rear of the DVR. You’ll need the manufacturers documentation for your PTZ system on hand to correctly set it up. The DVR is not compatible with all PTZ systems - in these cases, you’ll need a stand-alone PTZ controller.

PROTOCOL: The most important setting to configure correctly. A ‘protocol’ determines how the DVR communicates with the PTZ system, somewhat like a ‘language’. You should set this to match the specifications given for your PTZ system. The DVR supports the Pelco-P and Pelco-D protocols.

BAUD RATE: The speed at which the DVR will send information to the PTZ system. This must be set to a compatible level with your PTZ system.

DATA BIT & STOP BIT: The amount of data sent in an individual ‘packet’ (data bits), and the number of bits indicating the end of one packet and the beginning of another (stop bits). Again, this should be matched to the requirements of your PTZ system.

PARITY: An error checking method. This should be set in accordance with your PTZ system’s requirements.

CRUISE: Refers to a mode of operation which can be used for PTZ systems called “Cruise Mode”. When using Cruise Mode, the PTZ system can be set up to move constantly, pausing for a user-defined amount of time at preset points. Turning CRUISE off here will mean that the PTZ system can only be moved by the manual controls, and the Start Cruise option on the context menu will simply not function.

ADDRESS: The command address of the PTZ system. Typically, PTZ systems allow the user to define their own command address, usually by the use of a series of dip-switches located somewhere on the PTZ system. Each PTZ device needs a unique address to function correctly.

46Remember: After making changes to the settings press/click the APPLY button.

Image 48
Contents Channel H.264 DVR Easy Se Etup Guide 8ch H.264 DVR Before you begin FCC VerificationTable of Contents Overview Installation Tips & Tricks Package ContentsImportant Information Important GuidelinesLayout of the Rear Panel 3 4 5 6 7 Power Indicator This LED is Layout of the DVR4-2600Up menu. This is used to control PTZ If this sensor is blocked or obstructedLayout of the DVR4-2550 Layout of the Remote Control Page Navigating the Menus Remote Control USB MouseUsing the On-Screen Keyboard Important Remembering to Apply Your ChangesGetting Started Starting the DVR Page Main Menu Record MenuPage Display Setup Menu Naming ChannelsColor Setup Live Viewing Enabling and Disabling ChannelsDisplaying the Time Record Menu Record Setup Menu Manual Frame Rate Configuration Recording Schedule Setting the Schedule Copying and Pasting Schedules from day to dayMotion Detection Setup About Motion Detection How Motion Detection WorksMotion Detection Area Setup To set the Motion Detection AreaRed boxes mark the area that is sensitive to motion Network Menu See Remote Access Ports and UPnP on Page Record Video Search Video SearchTo execute a Video Search Detail Files and Log List Detail Files ScreenLog List Screen USB Backup Preparing a USB Flash DriveTo format your USB flash drive USB Backup Instructions Playback Playback Controls Installing the Playback Software Playing Backed Up Footage on a PCPlayback Interface Opening FilesPlaying Backed Up Footage on a Mac Playback InterfaceManaging the Playlist Opening Files Managing the Playlist Removing FilesAlarm Device ManagementHDD Management Page PTZ Menu Alarm Configuration Menu Email See Auto Email Setup Menu on Auto Email Setup Menu Tips and TricksPage System Setup Menu Setting the Date and Time Date and Time MenuConfiguring DST Daylight Savings Time Settings Remember to Apply your changesUser Setup Menu To set a Username and PasswordTo edit the level of access a User account has Video / Audio Setup Menu Language Menu Language MenuSystem Information Menu System Information MenuMaintain System Maintenance Menu PTZ Controls On the capabilities and limitations of your PTZ systemCruise Mode Setting up Cruise ModeRemote Access Your DVR & Local Network Correctly ConfiguredHigh-Speed Internet Connection Remote Access Ports and UPnP Port ConfigurationUPnP Enabling UPnPRemote Access IP addresses Public and Private IP AddressesWhat’s the difference? Page Remote Access via Internet Explorer To access the DVR remotely via Internet ExplorerOpen Internet Explorer Click Tools --Internet OptionsRemote Access from a Mobile Device Setting up the DVR for Mobile AccessRequirements Preparing your Mobile Device Check outSupported Mobile Platforms Changing or Installing the Hard Drive Troubleshooting Problem My DVR does not switch onTechnical Specifications Ntsc / PALWarranty Information Limited Warranty Terms & ConditionsHelpdesk / Technical Support Details Swann Technical Support
Related manuals
Manual 60 pages 36.73 Kb