2
Installation
The Dell™ 2161DS Console Switch requires that the Remote Console Switch Software be installed prior to use. Remote Console Switch Software allows a user to view and control a server attached to the 2161DS Console Switch system, configure and maintain the system, and prevent unauthorized access to the 2161DS Console Switch via IP connection.
NOTE: The analog port does not require the Remote Console Switch Software for operation. The analog port uses the
The 2161DS Console Switch system uses Ethernet networking infrastructure and TCP/IP protocol to transmit keyboard, video, and mouse information between operators and connected computers. Although 10BaseT Ethernet may be used, Dell recommends a dedicated, switched 100BaseT network.
CAUTION: Before performing any of the procedures listed in this section, read and follow the Safety Precautions outlined in the Overview section of this guide.
Getting Started
Before installing your 2161DS Console Switch, refer to the list below to ensure you have all items that shipped with the 2161DS Console Switch, as well as other items necessary for proper installation.
Supplied with the 2161DS Console Switch:
•2161DS Console Switch unit
•Local country power cord
•Rack mounting brackets
•Serial cable
•2161DS Console Switch Hardware and OSCAR User's Guide on CD
•2161DS Console Switch Remote Console Switch Software User's Guide on CD
•2161DS Console Switch Installation Instructions
Additional items needed:
•One Server Interface Pod (SIP) or Avocent® AVRIQ module per attached server
•One CAT 5 patch cable per attached server (up to 10 meters)
Optional items:
Installation
15