w w w . d e l l . c o m s u p p o r t . d e l l . c o m
To access the Terminal menu:
1Connect a terminal or system running terminal emulation software (such as HyperTerminal) to the configuration port on the back panel of the 2161DS Console Switch using the supplied serial cable. The terminal should be set to 9600 baud, 8 bits, 1 stop bit, no parity, and no flow control. The terminal may be connected at any time, even when the unit is powered.
2Press any key to access the main menu.
Network Configuration
The 2161DS Console Switch is configured for network access through this option. When it is selected, you will have access to the addressing that allows the 2161DS Console Switch to be positioned in your network. For more information, see "Rack Mounting Your 2161DS Console Switch".
Firmware Management
This menu option contains the Flash Download command. The Flash Download command allows you to keep your 2161DS Console Switch firmware current with upgrades available from Dell. For more information, see "Appendix A: Flash Upgrades".
Enable Debug Messages
This menu option allows you to configure the 2161DS Console Switch to display messages regarding the status of the 2161DS Console Switch unit. Once you select the level of detail you wish to receive, the 2161DS Console Switch will begin to display information on your terminal screen. When you are finished viewing, press any key to exit this mode.
Set/Change Passwords
The 2161DS Console Switch can be set to a secure mode where the Terminal menu cannot be accessed without first entering a password.
To activate security:
1Select the Set/Change Password menu option. You will be prompted to decide if you wish to continue. Press <y>.
2Type a password for this 2161DS Console Switch unit and press <Enter>. Passwords require 5 to 12 characters and must include at least one letter and one number. Passwords are also case sensitive. Entering a new password deactivates the old one.
3You will be prompted to
60
Terminal Operations