1If your console does not require a password to gain access to the Security dialog box, go to step 2.
- or -
If your console is password protected, see the previous procedure, then go to step 2.
2Select Enable Screen Saver.
3Type the number of minutes for delay time (from 1 to 99) that you want to delay activation of the screen saver.
4Choose Energy if your monitor is ENERGY STAR™ compliant; otherwise select Screen.
CAUTION: Monitor damage can result from the use of Energy mode with monitors not compliant with
ENERGY STAR™.
5(Optional) Click Test to activate the screen saver test which lasts 10 seconds then returns you to the Security dialog box.
6Click OK.
NOTE: Activation of the screen saver mode disconnects the user from a server; no server is selected. The status flag displays Free.
To exit the screen saver mode:
Press any key or move your mouse. The Main dialog box appears.
To turn off the screen saver:
1In the Security dialog box, clear Enable Screen Saver.
2Click OK.
To immediately turn on the screen saver:
Press <Print Screen>, then press <Pause>.
Viewing and Disconnecting Users
You can view and disconnect users through the User Status dialog box. The user name (U) will always be displayed; however, you can display either the server name or EID number to which a user is connected. If there is no user currently connected to a channel, the user field will be blank and the server field will display Free.
You can also automatically disconnect users after a specified period of inactivity by setting up an inactivity timeout in the Security dialog box. For more information, see "Setting Console Security".
To view current user connections:
1Press <Print Screen>. The Main dialog box will appear.
2Click Commands - User Status. The User Status dialog box appears. To disconnect a user:
1Press <Print Screen>. The Main dialog box will appear.
Analog Port Operation
43