Furuno IF-NMEASC manual Operation

Page 17

4.OPERATION

Normally, no operation is required except to power the unit (from the switchboard). The ST-BY LED on the cover is ON, OFF or flashing according to equipment state.

Flashing: NMEA 2000 data is input

ON: NMEA 2000 data is not input

OFF: Power loss, blown fuse, operation error

ST-BY LED

ST-BY

IF-NMEASC

INTERFACE UNIT

Image 17

Contents Model IF-NMEASC Page Important Notices Safety instructions for the operator Safety InstructionsIii Table of Contents Word to the Owner of the IF-NMEASC ForewordSystem Configuration Mounting Mounting ProcedureEquipment List Name Type Code No Qty RemarksWiring Cable construction LED state and equipment status AdjustmentsLEDs and Equipment Status Port no Sentence Baud rate bps Tx interval ms Setting Up Nmea PortsOutput Processing Sentence Output interval ms Output Processing Heading, Pitch and Roll OffsetsOperation Check point Remedy MAINTENANCE, TROUBLE- ShootingPreventive Maintenance Symptom Possible trouble Remedy TroubleshootingReplacing the Fuse Type Code No FuseSelf test Self TestMemory Clear This page is intentionally left blank Furuno Specifications of Interface Unit IF-NMEASC Jul.2307 R.Esumi Satellite Compass This page is intentionally left blank Page 00016689910