Furuno IF-NMEASC manual Cable construction

2. WIRING

Cable construction

Power cable	6	Approx. 40	3
DPYC-1.5
or equivalent
		Sheath		Armor
Armor
		Vinyl tape		Scrape off paint.
Sheath				45
φ = 11.7 mm
Conductor				Lay this part on applicable cable
S = 1.5 mm 2
φ = 1.56 mm				post and fix with two cable ties.
Cable connected to SC-30		Approx. 120
MJ-A10SPF0015-150C
	6	Aluminum tape
		7-core
		Cover drain wire		Lay this part on applicable cable
		with vinyl tubing.		post and fix with two cable ties.
Data cable		Approx. 70		3
TTYCS-1
or equivalent
		Braided shield		Armor
Armor		Vinyl tape		Scrape off paint.
	6			45
Sheath
Shield		Solder vinyl wire to		Lay this part on applicable cable
φ = 10.1 mm Conductor
S = 0.75 mm2		braided shield.		post and fix with two cable ties.
φ = 1.11 mm
Data cable		Approx. 70		3
TTYCS-4
or equivalent					Armor
				Vinyl sheath
		Braided shield
φ = 16.3 mm
				Vinyl tape.
Armor
Sheath		6
Shield
Conductor		Solder vinyl wire to		Lay this part on applicable
S = 0.75 mm2		braided shield.		cable post and fix with two
φ = 1.11 mm				cable ties.
Data transmission cable		Approx. 90
supplied by FURUNO
	6	Braided shield
		Solder vinyl wire to		Lay this part on applicable cable
				post and fix with two cable ties.
		braided shield.

WARNING

Do not connect this unit to NMEA 2000 bus.

It is intended for one-to-one connection with the SC-30. Connection to

an NMEA 2000 bus can result in network trouble and, in the worst case, fire.

3