Furuno IF-NMEASC manual Equipment List, Mounting Procedure, Name Type Code No Qty Remarks

1.MOUNTING

1.1	Equipment List
Name		Type	Code No.	Qty	Remarks
Interface Unit		IF-NMEASC	-	1
Installation		CP20-03001	001-023-400	1 set	• Cable ties (CN-150N, 12 pcs.)
Materials					• Self-tapping screws (φ3x10, 4 pcs.)
Spare Parts		SP20-01301	001-019-800	1 set	Fuse FGMB 125V 2A (3 pcs.)
1.2	Mounting Procedure

When choosing a mounting location for the unit, keep the following points in mind:

•Select a location where shock and vibration are minimal.

•Locate the unit away from places subject to rain or water splash.

•Keep the unit away from exhaust pipes and vents.

•Locate the unit out of direct sunlight because of heat that can build up inside its cabinet.

•The location should be well ventilated.

•Observe the maintenance space mentioned in the outline drawing at the back of this manual and the compass safe distances in the safety instructions.

•Fix the unit with four φ3x10 self-tapping screws (supplied).

FIXING HOLES

4

2-φ4

FIXING HOLES

#20

±0.5
118	199
43

207±0.5	#100	56
	# Minimum recommended
	maintenance space

1