Furuno IF-NMEASC manual Safety Instructions, Safety instructions for the operator

Page 4

SAFETY INSTRUCTIONS

The operator and installer must read the applicable safety instructions before attempting to install or operate the equipment.

 

WARNING

could result in death or serious injury.

 

 

 

 

Indicates a potentially hazardous situation which, if not avoided,

 

 

 

 

 

 

CAUTION

Indicates a potentially hazardous situation which, if not avoided,

 

 

can result in minor or moderate injury.

 

 

 

 

 

 

 

 

Warning, Caution

Prohibitive Action

Mandatory Action

 

 

 

 

 

 

Safety instructions for the operator

WARNING

Do not open the equipment.

Only qualified personnel should work inside the equipment.

Do not disassemble or modify the equipment.

Fire, electrical shock or serious injury can result.

Immediately turn off the power at the power source if

-water leaks into the equipment

-somethingWARNINGis dropped into the equipment

-the equipment is emitting smoke or is on fire

-the equipment is emitting strange noises

Continued use of the equipment can cause fire or electrical shock. Contact a FURUNO dealer or agent for service.

Do not operate the equipment with wet hands.

Electrical shock can result.

Use the proper fuse.

Use of the wrong fuse can cause fire or electrical shock.

WARNING

Do not place liquid-filled containers on the top of the equipment.

Fire or electrical shock can result if a liquid spills into the equipment.

Make sure no rain or water splash leaks into the equipment.

Fire or electrical shock can result if water leaks into the equipment.

ii

Image 4 Contents
Model IF-NMEASC Page Important Notices Safety Instructions Safety instructions for the operatorIii Table of Contents Foreword Word to the Owner of the IF-NMEASCSystem Configuration Mounting Procedure MountingEquipment List Name Type Code No Qty RemarksWiring Cable construction LEDs and Equipment Status AdjustmentsLED state and equipment status Setting Up Nmea Ports Port no Sentence Baud rate bps Tx interval msOutput Processing Sentence Output interval ms Heading, Pitch and Roll Offsets Output ProcessingOperation Preventive Maintenance MAINTENANCE, TROUBLE- ShootingCheck point Remedy Troubleshooting Symptom Possible trouble RemedyReplacing the Fuse Type Code No FuseSelf Test Self testMemory Clear This page is intentionally left blank Furuno Specifications of Interface Unit IF-NMEASC Jul.2307 R.Esumi Satellite Compass This page is intentionally left blank Page 00016689910