Compex Systems 802.11N manual Prepare Unit to mount to a pole

Page 19

Prepare Unit to mount to a pole

Unpack the 2 cable ties from the box.

Loop each cable tie through the mounting bracket hole at the top and bottom. Wrap them round the pole and tighten the cable ties to secure the unit to the pole.

Connect one end of an RJ45 Ethernet cable to the LAN OUT port of the Injector and the other end to LAN of the access point.

Maximum length of the RJ45 Category 5 cable is 100 meters*.

*Up to 200mW radio. For higher power radio need upgrade to higher rating power adapter.

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Page Trademark Information FCC Notice Declaration of Conformity Table of Contents Status System TabIntroduction Overview the ProductVirtual AP Multiple Ssid Highly Secured Wireless NetworkUConfig Utility Point-to-Point & Point-to-MultiPoint SupportAccess Point WDS Mode Station Mode Point-to-Point Station WDS ModeRouter Mode Repeater WDS Mode Device Panel Views and Descriptions Features Status and IndicationsAntenna Alignment Install the HardwareAntenna Alignment Installation Direction Mount the Unit on a Pole Setup RequirementsPrepare Unit to mount to a pole Page For Windows 95/98/98SE/ME/NT Configure the IP AddressStep Select the Use the following IP address radio button For Windows XP/2000Click on the OK button to close all windows Access with uConfig Access the Web InterfaceStep It then opens the device home page. The Status Access with a Web Browser Step Navigation How to save changesMain Menu Bar Basic Network Tab LAN SetupNetwork Modes Bridging and Routing Primary DNS IP optional Enable the radio Basic Wireless TabBasic Wireless Settings Wireless Mode Country Code Access Point Parameters SettingsWireless Profile Local AP-ESSIDRate Aggressiveness Channel Spectrum WidthChannel Frequency Data RateRemote AP-ESSID Station Parameters SettingsRemote AP Preferred MAC Channel Scan List Wireless Adapter modePreshared Key Wireless SecurityWPA or WPA2 Authentication Cipher TypeAccounting Port Authentication PortPrimary Radius Server IP Secondary Radius Server IPUser Password Station, Station WDS, Repeater WDS mode IdentityUser Name IEEE802.1x Key Rotation IEEE802.1x SettingsIEEE802.1x Key Length WEP Key Authentication TypeKey Type Current KeyVirtual Access Point VAP Long Range Parameters Setup Advance Wireless TabLong Range Parameters Noise Immunity Signal Strength Indicator RssiAdvanced Network Tab NAT Setup Spanning Tree SetupAdding an entry from Known Server Adding an entry from Custom Server Rule Type select By IP or By MAC Bandwidth ControlRouter Info Protocol version select RIPv1 or RIPv2 Firewall Setup Outbound Filtering Setup Page Services Tab Ping Watchdog Auto-RebootWeb Http Security Snmp SetupNTP Setup Engine ID Default isSSH Access Setup Telnet Access SetupSystem Log Setup System Tab Firmware UpgradeRead-Only Username Administrative and Read-only AccountEnable Read-Only Account Host NameDevice Maintenance Configuration ManagementStatus Reporting StatusMain WAN Setting LAN SettingRadio Wlan Local AP Statistics Station Connection Status InfoWlan Connected Status Channel WidthPage Appendix I Network Bridge ModeNetwork Mode Selections Bridge Mode Network SettingsPrimary/Secondary DNS IP Bridge IP AddressDhcp Fallback IP Spanning Tree Protocol Bridge mode Firewall Configuration SettingsAP-Router mode Network Settings Appendix II Wireless with Router ModePage Port Forwarding Settings IP of the host system which sends the packets Page Advanced Wireless Setting Appendix III- Advanced SettingsRate Aggressiveness Acknowledgement Timeout LED Thresholds Configuration Signal Strength LED SettingsSnmp Agent Appendix IV- ServicesSystem Log NTP Client, Web, Telnet, SSH Server

802.11N specifications

Compex Systems 802.11N solutions are designed to provide high-performance wireless networking, catering to the growing demand for faster and more reliable connectivity in various applications. The 802.11N standard, also known as Wi-Fi 4, significantly enhances the capabilities of previous Wi-Fi standards by utilizing advanced technologies and features.

One of the key characteristics of Compex Systems 802.11N products is their support for Multiple Input Multiple Output (MIMO) technology. MIMO allows the transmission of multiple data streams simultaneously, effectively improving throughput and range. This is especially useful in environments with high user density or physical obstructions, as it enhances the signal quality and minimizes interference.

Another significant feature is the use of Channel Bonding, which combines two adjacent channels to double the data rate. This capability enables users to experience higher speeds, typically reaching up to 600 Mbps under optimal conditions. The dual-band operation, supporting both 2.4 GHz and 5 GHz frequencies, further enhances flexibility and performance. The 2.4 GHz band offers broader coverage, while the 5 GHz band provides faster speeds with less congestion.

Compex Systems also incorporates advanced security protocols in their 802.11N solutions. With support for WPA2 encryption and robust authentication methods, users can ensure that their connections remain secure, protecting sensitive data from potential threats.

Quality of Service (QoS) is another critical feature, allowing network administrators to prioritize traffic according to application needs. This ensures that bandwidth-intensive applications, such as video streaming and online gaming, receive the necessary resources for optimal performance, even in a crowded network environment.

Designed for versatility, Compex Systems 802.11N devices can be employed in various scenarios, including enterprise, education, healthcare, and hospitality sectors. Their compact and durable designs make them suitable for deployment in both indoor and outdoor settings.

Overall, Compex Systems 802.11N solutions offer a comprehensive set of features and technologies aimed at providing robust, high-speed wireless connectivity. With MIMO, Channel Bonding, dual-band support, enhanced security, and QoS capabilities, these systems are well-suited to meet the demands of modern wireless networking environments.
Top Page Image Contents