Compex Systems 802.11N manual

Page 20

Connect the RJ45 Ethernet cable attached to the PoE Injector to a network device, such as to a switch or to the PC you will use to configure the access point.

PoE power input: Passive PoE (range 12V – 24V DC)

Connect the power adapter in the PoE kit to the main electrical supply and the power plug into the socket of the injector.

Now, turn on your power supply. Notice that the POWER LED has lighted up. This indicates that the access point is receiving power through the PoE Injector and that connection between the access point and your network has been established.

Note:

Please use the power adapter in the PoE kit. Using a power adapter with a different voltage rating will damage this product.

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Page Trademark Information FCC Notice Declaration of Conformity Table of Contents System Tab StatusOverview the Product IntroductionHighly Secured Wireless Network UConfig UtilityPoint-to-Point & Point-to-MultiPoint Support Virtual AP Multiple SsidAccess Point WDS Mode Station Mode Station WDS Mode Point-to-PointRouter Mode Repeater WDS Mode Features Status and Indications Device Panel Views and DescriptionsInstall the Hardware Antenna AlignmentAntenna Alignment Installation Direction Setup Requirements Mount the Unit on a PolePrepare Unit to mount to a pole Page Configure the IP Address For Windows 95/98/98SE/ME/NTStep For Windows XP/2000 Select the Use the following IP address radio buttonClick on the OK button to close all windows Access the Web Interface Access with uConfigStep It then opens the device home page. The Status Access with a Web Browser Step Main Menu Bar How to save changesNavigation Network Modes Bridging and Routing LAN SetupBasic Network Tab Primary DNS IP optional Basic Wireless Settings Basic Wireless TabEnable the radio Wireless Mode Access Point Parameters Settings Wireless ProfileLocal AP-ESSID Country CodeChannel Spectrum Width Channel FrequencyData Rate Rate AggressivenessRemote AP Preferred MAC Station Parameters SettingsRemote AP-ESSID Wireless Adapter mode Channel Scan ListWireless Security WPA or WPA2 AuthenticationCipher Type Preshared KeyAuthentication Port Primary Radius Server IPSecondary Radius Server IP Accounting PortUser Name Station, Station WDS, Repeater WDS mode IdentityUser Password IEEE802.1x Key Length IEEE802.1x SettingsIEEE802.1x Key Rotation Authentication Type Key TypeCurrent Key WEP KeyVirtual Access Point VAP Long Range Parameters Advance Wireless TabLong Range Parameters Setup Signal Strength Indicator Rssi Noise ImmunityAdvanced Network Tab Adding an entry from Known Server Spanning Tree SetupNAT Setup Adding an entry from Custom Server Router Info Protocol version select RIPv1 or RIPv2 Bandwidth ControlRule Type select By IP or By MAC Firewall Setup Outbound Filtering Setup Page Services Tab Auto-Reboot Ping WatchdogSnmp Setup NTP SetupEngine ID Default is Web Http SecuritySystem Log Setup Telnet Access SetupSSH Access Setup Firmware Upgrade System TabAdministrative and Read-only Account Enable Read-Only AccountHost Name Read-Only UsernameConfiguration Management Device MaintenanceMain StatusStatus Reporting Radio LAN SettingWAN Setting Station Connection Status Info Wlan Connected StatusChannel Width Wlan Local AP StatisticsPage Bridge Mode Network Mode SelectionsBridge Mode Network Settings Appendix I NetworkDhcp Fallback IP Bridge IP AddressPrimary/Secondary DNS IP Bridge mode Firewall Configuration Settings Spanning Tree ProtocolAppendix II Wireless with Router Mode AP-Router mode Network SettingsPage Port Forwarding Settings IP of the host system which sends the packets Page Rate Aggressiveness Appendix III- Advanced SettingsAdvanced Wireless Setting Acknowledgement Timeout Signal Strength LED Settings LED Thresholds ConfigurationAppendix IV- Services Snmp AgentNTP Client, Web, Telnet, SSH Server System Log

802.11N specifications

Compex Systems 802.11N solutions are designed to provide high-performance wireless networking, catering to the growing demand for faster and more reliable connectivity in various applications. The 802.11N standard, also known as Wi-Fi 4, significantly enhances the capabilities of previous Wi-Fi standards by utilizing advanced technologies and features.

One of the key characteristics of Compex Systems 802.11N products is their support for Multiple Input Multiple Output (MIMO) technology. MIMO allows the transmission of multiple data streams simultaneously, effectively improving throughput and range. This is especially useful in environments with high user density or physical obstructions, as it enhances the signal quality and minimizes interference.

Another significant feature is the use of Channel Bonding, which combines two adjacent channels to double the data rate. This capability enables users to experience higher speeds, typically reaching up to 600 Mbps under optimal conditions. The dual-band operation, supporting both 2.4 GHz and 5 GHz frequencies, further enhances flexibility and performance. The 2.4 GHz band offers broader coverage, while the 5 GHz band provides faster speeds with less congestion.

Compex Systems also incorporates advanced security protocols in their 802.11N solutions. With support for WPA2 encryption and robust authentication methods, users can ensure that their connections remain secure, protecting sensitive data from potential threats.

Quality of Service (QoS) is another critical feature, allowing network administrators to prioritize traffic according to application needs. This ensures that bandwidth-intensive applications, such as video streaming and online gaming, receive the necessary resources for optimal performance, even in a crowded network environment.

Designed for versatility, Compex Systems 802.11N devices can be employed in various scenarios, including enterprise, education, healthcare, and hospitality sectors. Their compact and durable designs make them suitable for deployment in both indoor and outdoor settings.

Overall, Compex Systems 802.11N solutions offer a comprehensive set of features and technologies aimed at providing robust, high-speed wireless connectivity. With MIMO, Channel Bonding, dual-band support, enhanced security, and QoS capabilities, these systems are well-suited to meet the demands of modern wireless networking environments.
Top Page Image Contents