Compex Systems 802.11N manual Wireless Mode

Page 34

Wireless Mode

There are 5 modes available.

Access Point

This mode can be connected to Station mode, and then forwards all the traffic to the network devices connected to the Ethernet devices of the Station.

Access Point WDS

This mode can be connected to Station WDS mode. Using WDS protocol, it allows a client or station device to bridge wireless traffic transparently.

Station:

This is a client mode that can be connected to the Access Point mode. It is used to bridge the wireless connection to an Access Point. It forwards all the traffic to/from the network devices to the Ethernet interface. This mode translates all the packets that pass through device to its own MAC address, thus resulting in a lack of transparency.

Station WDS:

WDS is the acronym of Wireless Distribution System. It can be connected to the Access Point WDS mode. It enables packet forwarding at layer 2 level. Unlike Station mode, it is fully transparent at layer 2 level.

**Note:- for Station WDS, Access Point WDS, Repeater WDS:

WDS protocol used is not defined as the standard, thus compatibility issues between equipment from different vendors might arise.

Repeater WDS

This mode consists of a Station WDS and an Access Point WDS mode. The Repeater WDS must first link up with an Access Point WDS, and then it can link up with a Station WDS. It acts as an extension to the link and can add more Repeater WDS as necessary.

*Note:- for Repeater WDS:

ESSID must be the same for the Remote AP and the Local AP.

The channels used will follow the Access Point WDS that it first linked up to.

Page 33 Page 35
Image 34
Page 33 Page 35
Contents Page Trademark Information FCC Notice Declaration of Conformity Table of Contents System Tab StatusOverview the Product IntroductionPoint-to-Point & Point-to-MultiPoint Support Highly Secured Wireless NetworkUConfig Utility Virtual AP Multiple SsidAccess Point WDS Mode Station Mode Station WDS Mode Point-to-PointRouter Mode Repeater WDS Mode Features Status and Indications Device Panel Views and DescriptionsInstall the Hardware Antenna AlignmentAntenna Alignment Installation Direction Setup Requirements Mount the Unit on a PolePrepare Unit to mount to a pole Page Configure the IP Address For Windows 95/98/98SE/ME/NTStep For Windows XP/2000 Select the Use the following IP address radio buttonClick on the OK button to close all windows Access the Web Interface Access with uConfigStep It then opens the device home page. The Status Access with a Web Browser Step Navigation How to save changesMain Menu Bar Basic Network Tab LAN SetupNetwork Modes Bridging and Routing Primary DNS IP optional Enable the radio Basic Wireless TabBasic Wireless Settings Wireless Mode Local AP-ESSID Access Point Parameters SettingsWireless Profile Country CodeData Rate Channel Spectrum WidthChannel Frequency Rate AggressivenessRemote AP-ESSID Station Parameters SettingsRemote AP Preferred MAC Wireless Adapter mode Channel Scan ListCipher Type Wireless SecurityWPA or WPA2 Authentication Preshared KeySecondary Radius Server IP Authentication PortPrimary Radius Server IP Accounting PortUser Password Station, Station WDS, Repeater WDS mode IdentityUser Name IEEE802.1x Key Rotation IEEE802.1x SettingsIEEE802.1x Key Length Current Key Authentication TypeKey Type WEP KeyVirtual Access Point VAP Long Range Parameters Setup Advance Wireless TabLong Range Parameters Signal Strength Indicator Rssi Noise ImmunityAdvanced Network Tab NAT Setup Spanning Tree SetupAdding an entry from Known Server Adding an entry from Custom Server Rule Type select By IP or By MAC Bandwidth ControlRouter Info Protocol version select RIPv1 or RIPv2 Firewall Setup Outbound Filtering Setup Page Services Tab Auto-Reboot Ping WatchdogEngine ID Default is Snmp SetupNTP Setup Web Http SecuritySSH Access Setup Telnet Access SetupSystem Log Setup Firmware Upgrade System TabHost Name Administrative and Read-only AccountEnable Read-Only Account Read-Only UsernameConfiguration Management Device MaintenanceStatus Reporting StatusMain WAN Setting LAN SettingRadio Channel Width Station Connection Status InfoWlan Connected Status Wlan Local AP StatisticsPage Bridge Mode Network Settings Bridge ModeNetwork Mode Selections Appendix I NetworkPrimary/Secondary DNS IP Bridge IP AddressDhcp Fallback IP Bridge mode Firewall Configuration Settings Spanning Tree ProtocolAppendix II Wireless with Router Mode AP-Router mode Network SettingsPage Port Forwarding Settings IP of the host system which sends the packets Page Advanced Wireless Setting Appendix III- Advanced SettingsRate Aggressiveness Acknowledgement Timeout Signal Strength LED Settings LED Thresholds ConfigurationAppendix IV- Services Snmp AgentNTP Client, Web, Telnet, SSH Server System Log

802.11N specifications

Compex Systems 802.11N solutions are designed to provide high-performance wireless networking, catering to the growing demand for faster and more reliable connectivity in various applications. The 802.11N standard, also known as Wi-Fi 4, significantly enhances the capabilities of previous Wi-Fi standards by utilizing advanced technologies and features.

One of the key characteristics of Compex Systems 802.11N products is their support for Multiple Input Multiple Output (MIMO) technology. MIMO allows the transmission of multiple data streams simultaneously, effectively improving throughput and range. This is especially useful in environments with high user density or physical obstructions, as it enhances the signal quality and minimizes interference.

Another significant feature is the use of Channel Bonding, which combines two adjacent channels to double the data rate. This capability enables users to experience higher speeds, typically reaching up to 600 Mbps under optimal conditions. The dual-band operation, supporting both 2.4 GHz and 5 GHz frequencies, further enhances flexibility and performance. The 2.4 GHz band offers broader coverage, while the 5 GHz band provides faster speeds with less congestion.

Compex Systems also incorporates advanced security protocols in their 802.11N solutions. With support for WPA2 encryption and robust authentication methods, users can ensure that their connections remain secure, protecting sensitive data from potential threats.

Quality of Service (QoS) is another critical feature, allowing network administrators to prioritize traffic according to application needs. This ensures that bandwidth-intensive applications, such as video streaming and online gaming, receive the necessary resources for optimal performance, even in a crowded network environment.

Designed for versatility, Compex Systems 802.11N devices can be employed in various scenarios, including enterprise, education, healthcare, and hospitality sectors. Their compact and durable designs make them suitable for deployment in both indoor and outdoor settings.

Overall, Compex Systems 802.11N solutions offer a comprehensive set of features and technologies aimed at providing robust, high-speed wireless connectivity. With MIMO, Channel Bonding, dual-band support, enhanced security, and QoS capabilities, these systems are well-suited to meet the demands of modern wireless networking environments.
Top Page Image Contents