Compex Systems 802.11N manual Basic Wireless Tab, Enable the radio, Basic Wireless Settings

Page 33

Basic Wireless Tab

Under the tab, there is the selection of 4 radios.

Fig 2.1 Basic Wireless Tab

Currently device support only one 802..11n radio card. Select RADIO 1 to configure.

Basic Wireless Tab contains all the wireless setup, which is necessary for the operator to setup the wireless part of the link.

Enable the radio

Fig 2.2 Enable Radio Checkbox

Tick/Untick the checkbox to enable/disable the radio.

Basic Wireless Settings

All the basic wireless settings can be configured in this page. Operators can change the ESSID, regulatory country code, wireless profile, channel spectrum width, frequency of interest, data rates, transmit power and rate aggressiveness.

Page 32 Page 34
Image 33
Page 32 Page 34
Contents Page Trademark Information FCC Notice Declaration of Conformity Table of Contents Status System TabIntroduction Overview the ProductUConfig Utility Highly Secured Wireless NetworkPoint-to-Point & Point-to-MultiPoint Support Virtual AP Multiple SsidAccess Point WDS Mode Station Mode Point-to-Point Station WDS ModeRouter Mode Repeater WDS Mode Device Panel Views and Descriptions Features Status and IndicationsAntenna Alignment Install the HardwareAntenna Alignment Installation Direction Mount the Unit on a Pole Setup RequirementsPrepare Unit to mount to a pole Page For Windows 95/98/98SE/ME/NT Configure the IP AddressStep Select the Use the following IP address radio button For Windows XP/2000Click on the OK button to close all windows Access with uConfig Access the Web InterfaceStep It then opens the device home page. The Status Access with a Web Browser Step How to save changes NavigationMain Menu Bar LAN Setup Basic Network TabNetwork Modes Bridging and Routing Primary DNS IP optional Basic Wireless Tab Enable the radioBasic Wireless Settings Wireless Mode Wireless Profile Access Point Parameters SettingsLocal AP-ESSID Country CodeChannel Frequency Channel Spectrum WidthData Rate Rate AggressivenessStation Parameters Settings Remote AP-ESSIDRemote AP Preferred MAC Channel Scan List Wireless Adapter modeWPA or WPA2 Authentication Wireless SecurityCipher Type Preshared KeyPrimary Radius Server IP Authentication PortSecondary Radius Server IP Accounting PortStation, Station WDS, Repeater WDS mode Identity User PasswordUser Name IEEE802.1x Settings IEEE802.1x Key RotationIEEE802.1x Key Length Key Type Authentication TypeCurrent Key WEP KeyVirtual Access Point VAP Advance Wireless Tab Long Range Parameters SetupLong Range Parameters Noise Immunity Signal Strength Indicator RssiAdvanced Network Tab Spanning Tree Setup NAT SetupAdding an entry from Known Server Adding an entry from Custom Server Bandwidth Control Rule Type select By IP or By MACRouter Info Protocol version select RIPv1 or RIPv2 Firewall Setup Outbound Filtering Setup Page Services Tab Ping Watchdog Auto-RebootNTP Setup Snmp SetupEngine ID Default is Web Http SecurityTelnet Access Setup SSH Access SetupSystem Log Setup System Tab Firmware UpgradeEnable Read-Only Account Administrative and Read-only AccountHost Name Read-Only UsernameDevice Maintenance Configuration ManagementStatus Status ReportingMain LAN Setting WAN SettingRadio Wlan Connected Status Station Connection Status InfoChannel Width Wlan Local AP StatisticsPage Network Mode Selections Bridge ModeBridge Mode Network Settings Appendix I NetworkBridge IP Address Primary/Secondary DNS IPDhcp Fallback IP Spanning Tree Protocol Bridge mode Firewall Configuration SettingsAP-Router mode Network Settings Appendix II Wireless with Router ModePage Port Forwarding Settings IP of the host system which sends the packets Page Appendix III- Advanced Settings Advanced Wireless SettingRate Aggressiveness Acknowledgement Timeout LED Thresholds Configuration Signal Strength LED SettingsSnmp Agent Appendix IV- ServicesSystem Log NTP Client, Web, Telnet, SSH Server

802.11N specifications

Compex Systems 802.11N solutions are designed to provide high-performance wireless networking, catering to the growing demand for faster and more reliable connectivity in various applications. The 802.11N standard, also known as Wi-Fi 4, significantly enhances the capabilities of previous Wi-Fi standards by utilizing advanced technologies and features.

One of the key characteristics of Compex Systems 802.11N products is their support for Multiple Input Multiple Output (MIMO) technology. MIMO allows the transmission of multiple data streams simultaneously, effectively improving throughput and range. This is especially useful in environments with high user density or physical obstructions, as it enhances the signal quality and minimizes interference.

Another significant feature is the use of Channel Bonding, which combines two adjacent channels to double the data rate. This capability enables users to experience higher speeds, typically reaching up to 600 Mbps under optimal conditions. The dual-band operation, supporting both 2.4 GHz and 5 GHz frequencies, further enhances flexibility and performance. The 2.4 GHz band offers broader coverage, while the 5 GHz band provides faster speeds with less congestion.

Compex Systems also incorporates advanced security protocols in their 802.11N solutions. With support for WPA2 encryption and robust authentication methods, users can ensure that their connections remain secure, protecting sensitive data from potential threats.

Quality of Service (QoS) is another critical feature, allowing network administrators to prioritize traffic according to application needs. This ensures that bandwidth-intensive applications, such as video streaming and online gaming, receive the necessary resources for optimal performance, even in a crowded network environment.

Designed for versatility, Compex Systems 802.11N devices can be employed in various scenarios, including enterprise, education, healthcare, and hospitality sectors. Their compact and durable designs make them suitable for deployment in both indoor and outdoor settings.

Overall, Compex Systems 802.11N solutions offer a comprehensive set of features and technologies aimed at providing robust, high-speed wireless connectivity. With MIMO, Channel Bonding, dual-band support, enhanced security, and QoS capabilities, these systems are well-suited to meet the demands of modern wireless networking environments.
Top Page Image Contents