Datalogic Scanning DS4300 manual MA Current Loop INT-24 Accessory Only, Clin

DATALOGIC DS4300

20 mA Current Loop (INT-24 Accessory Only)

When the INT-24 accessory board is installed, the DS4300 is equipped with a 20 mA active current loop interface.

The following pins of the 25-pin connector are used for the connections:

Pin	Name	Function
4	CLOUT-	current loop output
5	CLIN-	current loop input
7	SGND Main	signal ground main interface

DS4300/DS4600	USER INTERFACE
+
I = 20 mA
4	C.L. OUT-

+

I = 20 mA

7SGND Main

5C.L. IN-

GND

MAX. 300 METERS

Figure 2.18 - 20 mA active C.L. connections

For 20 mA passive current loop interface connections, contact your local Datalogic representative.

Installation - 2.15