Datalogic Scanning DS4300 manual Electrical Connections for 25-PIN Models

DS4300 DATALOGIC

2.4 ELECTRICAL CONNECTIONS FOR 25-PIN MODELS

25-pin connector models (see paragraph 1.3) are equipped with a cable terminated by a 25-pin D-sub connector for connection to the power supply and input/output signals. The details of the connector pins are indicated in the following table:

	Figure 2.10 - 25-pin D-sub connector
	25-pin D-sub connector pinout
Pin	Name	Function
13	VS	Power supply input voltage +
25	GND	Power supply input voltage -
1	CHASSIS	Chassis Ground
9	VS	External Trigger supply voltage +
18	EXT TRIG+	External Trigger +
19	EXT TRIG-	External Trigger -
6	IN1+	Input +
10	IN1-	Input -
8	OUT1+	Output +
22	OUT1-	Output -
11	OUT2+	Output +
12	OUT2-	Output -
14	IN2+	Input +
15	IN2-	Input -
20	RXAUX	Auxiliary RS232 input
21	TXAUX	Auxiliary RS232 output
23	SGND Aux	Signal Ground Auxiliary interface
24	GND	Power supply input voltage -
16	Reserved
17	Reserved
		RS232	RS485	RS485	20 mA CL
			full-duplex	half-duplex	(INT-24 Only)
2		TX232	TX485+	RTX485+
3	Main interface	RX232	RX485+
4	(see par. 2.4.2)	RTS232	TX485-	RTX485-	CLOUT-
5		CTS232	RX485-		CLIN-
7		SGND Main	SGND Main	SGND Main	SGND Main

2.8- Installation