Datalogic Scanning DS4300 manual Technical Features, Reading Features Note

Page 52

DATALOGIC

DS4300

5 TECHNICAL FEATURES

ELECTRICAL FEATURES

Power
Supply voltage	10 to 30 Vdc
Power consumption max.	5.5 W

Serial Interfaces
Main	RS232, RS485 full-duplex, RS485 half-duplex
	(20 mA C.L. only with INT-24 accessory )
Auxiliary	RS232
Baud rates	1200 to 115200
Inputs	External Trigger, IN1, IN2
	(optocoupled NPN or PNP)
Voltage max.	30 Vdc
Input current max.	25 mA

Outputs	User-defined OUT1 and OUT2
	(optocoupled open emitter, open collector)
VCE max.	40 Vdc
Collector current max.	40 mA continuous; 130 mA pulsed
VCE saturation	1V at 10 mA max.
Power dissipation max.	90 mW at 40 ° C (Ambient temp.)

OPTICAL FEATURES

Light source	Semiconductor laser diode
Wave length (Note 1)	630 ~ 680 nm
Safety class	Class 2 - IEC 825-1; Class II - CDRH

READING FEATURES (Note 2)

Scan rate	800 scans/sec
Aperture angle	60°
Reading distance	50 mm (1.9 in) to 400 mm (15.7 in)
Maximum resolution	0.20 mm (8 mils)

USER INTERFACE

LED indicators

Ready, Good Read, External Trigger ,

Data Transmission, Laser Beam Active

Technical Features - 5.1

Image 52

Contents Page Installation Manual DS4300Datalogic S.p.A DS4300-XXXX, Laser Scanner and all its modelsContents Maintenance Guide to Installation DS4300 General ViewFigure B Laser Safety Safety PrecautionsStandard Regulations Laser diode class label Power Supply General Features IntroductionStandard Application Program ProgrammabilityDescription Red, indicates the reader is connected to the power supply Available Models AccessoriesDS4300 Installation Package ContentsMechanical Installation Overall dimensionsJunction BOX Installation Junction Box MountingJunction box mounting Junction Box Electrical Connections System cable connections to the junction boxBOX pinout for DS4300 Pin Name Pin RS232 RS485 MA CL Full-duplexScanner cable connections to the junction box Pin D-sub connector pinout Name Function Electrical Connections for 25-PIN ModelsPower Supply DS4300Main Serial Interface RS232RS232 Pin Name Function13 RS232 main interface connections RS485 Full-Duplex 15 RS485 full-duplex connectionsRS485 Half-Duplex MultiplexerChassis MA Current Loop INT-24 Accessory Only ClinAuxiliary RS232 Interface InputsEXT TRIG+ 22 Input PNP command using external power Outputs 24 Open collector output connectionPositioning 25 Pitch angleTypical Layouts Point-to-PointPass Through DS4300 Host Main serial interface3 RS232 Master/Slave 30 RS232 Master/Slave layout4 RS485 Master/Slave HostMultiplexer 32 Multiplexer layoutThis page is intentionally left blank Installation Reading Features Advanced Code ReconstructionTilt Angle for Advanced Code Reconstruction Tilt angleStep Ladder Mode Decoding Capacity in Linear ModeSN = LH/LS * SS Picket Fence Mode SN = FW-LW/LS * SSPerformance Reading Diagrams DS4300-100X Code Resolution StandardDS4300-100X Code Resolution High Code Resolution HighThis page is intentionally left blank Reading Features Maintenance CleaningThis page is intentionally left blank Maintenance Technical Features Reading Features NoteSoftware Features