Datalogic Scanning DS4300 manual Software Features

DS4300DATALOGIC

SOFTWARE FEATURES

READABLE CODE SYMBOLOGIES

•	EAN/UPC	•	Code 93
•	2/5 Interleaved	•	Code 128
•	Code 39	•	EAN 128
•	Codabar	•	Pharmacode
CODE SELECTION		up to six codes during one reading phase
DECODING SAFETY		can enable multiple good reads of same code
HEADERS AND TERMINATORS		up to four headers and four terminators
OPERATING MODES		ON LINE, AUTOMATIC, SERIAL ON LINE, TEST
CONFIGURATION MODES		• through menus using WinHost utility
		• receiving commands from one of the serial
		ports (HOST MODE)
PARAMETER STORAGE		Non-volatile internal memory
ENVIRONMENTAL FEATURES
Operating temperature (Note 3)		0 to 40 ° C (32 to 104 °F)
Storage temperature		-20	to 70 ° C (-4 to 158 °F)
Humidity max.		90% non condensing
Vibration resistance		IEC 68-2-6 test FC 1.5 mm;
		10 to 55 Hz; 2 hours on each axis
Shock resistance		IEC 68-2-27 test EA 30G;
		11 ms; 3 shocks on each axis
Protection class		IP65
PHYSICAL FEATURES
Mechanical dimensions		101 x 83.5 x 42 mm (3.97 x 3.29 x 1.65 in.)
Weight		about 800 g. (28.2 oz.)

Note 1: The features given are typical at a 25 ° C ambient temperature (if not otherwise indicated).

Note 2: Further details given in paragraphs 3.3 and 3.4.

Note 3: If the reader is used in high temperature environments (over 35 ° C), use of the Beam shutter is advised (for details refer to the WinHost Help On Line).

5.2– Technical Features