IP configuration
In case you forgot the address of FieldCommander, you can force it to accept a new IP address by way of ARP and PING commands, see later this chapter.
Now you should identify yourself before you can access any of the actual configuration pages. Log in with the preconfigured "admin" account:
User name: admin
Password: admin
Note that both fields are case sensitive.
Note: For security reasons, it is strongly recommended to change this password. See the User's Guide for instructions.
After logging in, the "General" page shows the following information:
Status: | indicates whether or not a script is running |
Host name: | network name of the unit |
IP address: | IP network address assigned to this unit (currently: 10.0.0.1) |
Product model: | the product type identification of the unit |
Software version: | currently installed firmware version |
Serial number: | unique serial identification also printed on the unit |
Logged in as: | name of the user currently logged in (currently: admin) |
The configuration system is split into several tabs. The User's Guide explains the web user interface in detail, here we only discuss the system's IP settings
Click the "System" tab to go to the System page.
CER International bv | 17 |