Field Controls 10 Technical Specifications, type C 4GB GB Flash drive 256MB reserved for system

Page 31
Technical Specifications

Technical Specifications

Technical Specifications

Hardware

CPU

(type A) 433MHz AMD Geode LX700

 

(type B/C) 500MHz AMD Geode LX800

Memory

(type A) 128 MB SDRAM

 

(type B/C) 256 MB SDRAM

Storage

(type A/B) 1GB GB Flash drive (256MB reserved for system)

 

(type C) 4GB GB Flash drive (256MB reserved for system)

Indicators

Power LED

Power supply voltage

7-18V DC on power adapter plug

Power consumption

0.25-0.4A max at 12V DC (excl. USB devices)

Operating temperature

0 ~ 50°C (32 ~ 122°F)

Case

Indoor:

 

Mechanical

Aluminum casing, desktop use or DIN-rail mount

Dimensions (WxDxH)

16.3 x 11.25 x 3.0 cm (6.42 x 4.43 x 1.18 inch)

Outdoor version:

 

Mechanical

Die-Cast Aluminium NEMA-67 casing, wall or 1" mast mount

Dimension (WxDxH)

21 x 15 x 6 cm (8.3 x 5.9 x 2.4 inch) without bracket

RS-232 Interface

Interface

one RS-232 serial port (EIA/TIA-232-C)

Connector

D-sub 9 pins (EIA/TIA-574)

Distance

15.2 meter max (50 feet)

Data bits

5, 6, 7 or 8

Stop bits

1, 1½ or 2

Parity

Even, Odd, Mark, Space, None

Flow control

(Port 1) XON/XOFF, None

 

(Port 2/3 Optional) XON/XOFF, CTS/RTS, DTR/DSR, None

Signals

(Port 1) TxD, RxD, GND

 

(Port 2/3 Optional) TxD, RxD, RTS, CTS, DSR, DTR, CD, RI, GND

CER International bv

31

Image 31
Contents Installation Guide Hardware Platform FChwp10Page Installation Warning Safety InformationQualified Personnel Warning Disclaimer Restricted Access Area WarningSoftware License Terms End User License Agreement Device handling Power Supply Disconnection WarningAbout this manual Table of ContentsPorts on your controller Pin Assignments Technical Specifications Physical DimensionsOrganisation of the documentation About this manualFront InstallationSystem requirements Getting familiarBack Bottom Physical installation Hardware installationConnecting power Hardware Platform 10 Installation Guide Power Over Ethernet When you co-locate the controller, you can connect to it through a Connecting to the networkHardware Platform 10 Installation Guide Addressing basics IP configurationConfigure IP address with browser Assigning an IP address on a FieldCommanderNote that both fields are case sensitive User name admin Password admincurrently installed firmware version name of the user currently logged in currently adminAddress Resolution Protocol Dynamic Host Configuration ProtocolBootp Bootstrap ProtocolForce new IP address using ARP+PING Assigning an IP address on an ELS controller Assigning an IP address on an EWS controller The ping test Testing the Ethernet connectionThe browser test The connections Serial interfaceRS-232 The RS-232c standardThe RS-485 standard RS-485 option onlyC Star network avoid D Mixed, backbone & star avoid A Backbone with stubs workable B Daisy chain bestThe RS-485 pin-out Ports on your controller Pin Assignments Color POE GND power returnSignal Pin Assignments EthernetVGABlue Hardware Platform 10 Installation Guide VGAVGARed VGAGreentype C 4GB GB Flash drive 256MB reserved for system Technical SpecificationsVideo Interface model C only Hardware Platform 10 Installation Guide RS-485 Interface option onlyNetwork Interface USB Interface option onlyAll sizes in millimeters Physical DimensionsRegulatory Notice to the userCopyrights TrademarksDeclaration of Confority Part no. FCHWP10IG, revision FieldCommander is a product of CER International bv PostbusThe latest documentation is available NL 4700 AG Roosendaal The Netherlands TEL +31 0165 FAX +31 0165