IP configuration
For EWS controllers:
Assigning an IP address on an EWS controller
The IP address on an EWS controller is defined in a configuration file and set to 10.0.0.1 by default.
To change this IP address, connect to the ELS using an USB keyboard, SSH or the serial console. Then log in using username / password (default els / elsroot) and edit the file /etc/network/interfaces
DHCP: auto eth*
iface eth* inet dhcp
Fixed IP (10.0.0.1): auto eth*
iface eth* inet static address 10.0.0.1 gateway 127.0.0.1 netmask 255.0.0.0 network 10.0.0.0 broadcast 10.0.0.255
The EWS must be rebooted for the changes to take affect.
CER International bv | 21 |